DlBg%B'.7h=Parse option arguments. Getopts is used by shell procedures to parse positional parameters as options. OPTSTRING contains the option letters to be recognized; if a letter is followed by a colon, the option is expected to have an argument, which should be separated from it by white space. Each time it is invoked, getopts will place the next option in the shell variable $name, initializing name if it does not exist, and the index of the next argument to be processed into the shell variable OPTIND. OPTIND is initialized to 1 each time the shell or a shell script is invoked. When an option requires an argument, getopts places that argument into the shell variable OPTARG. getopts reports errors in one of two ways. If the first character of OPTSTRING is a colon, getopts uses silent error reporting. In this mode, no error messages are printed. If an invalid option is seen, getopts places the option character found into OPTARG. If a required argument is not found, getopts places a ':' into NAME and sets OPTARG to the option character found. If getopts is not in silent mode, and an invalid option is seen, getopts places '?' into NAME and unsets OPTARG. If a required argument is not found, a '?' is placed in NAME, OPTARG is unset, and a diagnostic message is printed. If the shell variable OPTERR has the value 0, getopts disables the printing of error messages, even if the first character of OPTSTRING is not a colon. OPTERR has the value 1 by default. Getopts normally parses the positional parameters ($0 - $9), but if more arguments are given, they are parsed instead. Exit Status: Returns success if an option is found; fails if the end of options is encountered or an error occurs.Read a line from the standard input and split it into fields. Reads a single line from the standard input, or from file descriptor FD if the -u option is supplied. The line is split into fields as with word splitting, and the first word is assigned to the first NAME, the second word to the second NAME, and so on, with any leftover words assigned to the last NAME. Only the characters found in $IFS are recognized as word delimiters. If no NAMEs are supplied, the line read is stored in the REPLY variable. Options: -a array assign the words read to sequential indices of the array variable ARRAY, starting at zero -d delim continue until the first character of DELIM is read, rather than newline -e use Readline to obtain the line in an interactive shell -i text Use TEXT as the initial text for Readline -n nchars return after reading NCHARS characters rather than waiting for a newline, but honor a delimiter if fewer than NCHARS characters are read before the delimiter -N nchars return only after reading exactly NCHARS characters, unless EOF is encountered or read times out, ignoring any delimiter -p prompt output the string PROMPT without a trailing newline before attempting to read -r do not allow backslashes to escape any characters -s do not echo input coming from a terminal -t timeout time out and return failure if a complete line of input is not read withint TIMEOUT seconds. The value of the TMOUT variable is the default timeout. TIMEOUT may be a fractional number. If TIMEOUT is 0, read returns success only if input is available on the specified file descriptor. The exit status is greater than 128 if the timeout is exceeded -u fd read from file descriptor FD instead of the standard input Exit Status: The return code is zero, unless end-of-file is encountered, read times out, or an invalid file descriptor is supplied as the argument to -u.Set Readline key bindings and variables. Bind a key sequence to a Readline function or a macro, or set a Readline variable. The non-option argument syntax is equivalent to that found in ~/.inputrc, but must be passed as a single argument: e.g., bind '"\C-x\C-r": re-read-init-file'. Options: -m keymap Use KEYMAP as the keymap for the duration of this command. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. -l List names of functions. -P List function names and bindings. -p List functions and bindings in a form that can be reused as input. -S List key sequences that invoke macros and their values -s List key sequences that invoke macros and their values in a form that can be reused as input. -V List variable names and values -v List variable names and values in a form that can be reused as input. -q function-name Query about which keys invoke the named function. -u function-name Unbind all keys which are bound to the named function. -r keyseq Remove the binding for KEYSEQ. -f filename Read key bindings from FILENAME. -x keyseq:shell-command Cause SHELL-COMMAND to be executed when KEYSEQ is entered. Exit Status: bind returns 0 unless an unrecognized option is given or an error occurs.Set or unset values of shell options and positional parameters. Change the value of shell attributes and positional parameters, or display the names and values of shell variables. Options: -a Mark variables which are modified or created for export. -b Notify of job termination immediately. -e Exit immediately if a command exits with a non-zero status. -f Disable file name generation (globbing). -h Remember the location of commands as they are looked up. -k All assignment arguments are placed in the environment for a command, not just those that precede the command name. -m Job control is enabled. -n Read commands but do not execute them. -o option-name Set the variable corresponding to option-name: allexport same as -a braceexpand same as -B emacs use an emacs-style line editing interface errexit same as -e errtrace same as -E functrace same as -T hashall same as -h histexpand same as -H history enable command history ignoreeof the shell will not exit upon reading EOF interactive-comments allow comments to appear in interactive commands keyword same as -k monitor same as -m noclobber same as -C noexec same as -n noglob same as -f nolog currently accepted but ignored notify same as -b nounset same as -u onecmd same as -t physical same as -P pipefail the return value of a pipeline is the status of the last command to exit with a non-zero status, or zero if no command exited with a non-zero status posix change the behavior of bash where the default operation differs from the Posix standard to match the standard privileged same as -p verbose same as -v vi use a vi-style line editing interface xtrace same as -x -p Turned on whenever the real and effective user ids do not match. Disables processing of the $ENV file and importing of shell functions. Turning this option off causes the effective uid and gid to be set to the real uid and gid. -t Exit after reading and executing one command. -u Treat unset variables as an error when substituting. -v Print shell input lines as they are read. -x Print commands and their arguments as they are executed. -B the shell will perform brace expansion -C If set, disallow existing regular files to be overwritten by redirection of output. -E If set, the ERR trap is inherited by shell functions. -H Enable ! style history substitution. This flag is on by default when the shell is interactive. -P If set, do not follow symbolic links when executing commands such as cd which change the current directory. -T If set, the DEBUG trap is inherited by shell functions. - Assign any remaining arguments to the positional parameters. The -x and -v options are turned off. Using + rather than - causes these flags to be turned off. The flags can also be used upon invocation of the shell. The current set of flags may be found in $-. The remaining n ARGs are positional parameters and are assigned, in order, to $1, $2, .. $n. If no ARGs are given, all shell variables are printed. Exit Status: Returns success unless an invalid option is given.Project-Id-Version: bash Report-Msgid-Bugs-To: FULL NAME POT-Creation-Date: 2009-12-30 08:25-0500 PO-Revision-Date: 2010-02-08 20:09+0000 Last-Translator: Robert Readman Language-Team: English (United Kingdom) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2011-02-04 23:21+0000 X-Generator: Launchpad (build 12309) Parse option arguments. Getopts is used by shell procedures to parse positional parameters as options. OPTSTRING contains the option letters to be recognised; if a letter is followed by a colon, the option is expected to have an argument, which should be separated from it by white space. Each time it is invoked, getopts will place the next option in the shell variable $name, initialising name if it does not exist, and the index of the next argument to be processed into the shell variable OPTIND. OPTIND is initialised to 1 each time the shell or a shell script is invoked. When an option requires an argument, getopts places that argument into the shell variable OPTARG. getopts reports errors in one of two ways. If the first character of OPTSTRING is a colon, getopts uses silent error reporting. In this mode, no error messages are printed. If an invalid option is seen, getopts places the option character found into OPTARG. If a required argument is not found, getopts places a ':' into NAME and sets OPTARG to the option character found. If getopts is not in silent mode, and an invalid option is seen, getopts places '?' into NAME and unsets OPTARG. If a required argument is not found, a '?' is placed in NAME, OPTARG is unset, and a diagnostic message is printed. If the shell variable OPTERR has the value 0, getopts disables the printing of error messages, even if the first character of OPTSTRING is not a colon. OPTERR has the value 1 by default. Getopts normally parses the positional parameters ($0 - $9), but if more arguments are given, they are parsed instead. Exit Status: Returns success if an option is found; fails if the end of options is encountered or an error occurs.Read a line from the standard input and split it into fields. Reads a single line from the standard input, or from file descriptor FD if the -u option is supplied. The line is split into fields as with word splitting, and the first word is assigned to the first NAME, the second word to the second NAME, and so on, with any leftover words assigned to the last NAME. Only the characters found in $IFS are recognised as word delimiters. If no NAMEs are supplied, the line read is stored in the REPLY variable. Options: -a array assign the words read to sequential indices of the array variable ARRAY, starting at zero -d delim continue until the first character of DELIM is read, rather than newline -e use Readline to obtain the line in an interactive shell -i text Use TEXT as the initial text for Readline -n nchars return after reading NCHARS characters rather than waiting for a newline, but honor a delimiter if fewer than NCHARS characters are read before the delimiter -N nchars return only after reading exactly NCHARS characters, unless EOF is encountered or read times out, ignoring any delimiter -p prompt output the string PROMPT without a trailing newline before attempting to read -r do not allow backslashes to escape any characters -s do not echo input coming from a terminal -t timeout time out and return failure if a complete line of input is not read withint TIMEOUT seconds. The value of the TMOUT variable is the default timeout. TIMEOUT may be a fractional number. If TIMEOUT is 0, read returns success only if input is available on the specified file descriptor. The exit status is greater than 128 if the timeout is exceeded -u fd read from file descriptor FD instead of the standard input Exit Status: The return code is zero, unless end-of-file is encountered, read times out, or an invalid file descriptor is supplied as the argument to -u.Set Readline key bindings and variables. Bind a key sequence to a Readline function or a macro, or set a Readline variable. The non-option argument syntax is equivalent to that found in ~/.inputrc, but must be passed as a single argument: e.g., bind '"\C-x\C-r": re-read-init-file'. Options: -m keymap Use KEYMAP as the keymap for the duration of this command. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. -l List names of functions. -P List function names and bindings. -p List functions and bindings in a form that can be reused as input. -S List key sequences that invoke macros and their values -s List key sequences that invoke macros and their values in a form that can be reused as input. -V List variable names and values -v List variable names and values in a form that can be reused as input. -q function-name Query about which keys invoke the named function. -u function-name Unbind all keys which are bound to the named function. -r keyseq Remove the binding for KEYSEQ. -f filename Read key bindings from FILENAME. -x keyseq:shell-command Cause SHELL-COMMAND to be executed when KEYSEQ is entered. Exit Status: bind returns 0 unless an unrecognised option is given or an error occurs.Set or unset values of shell options and positional parameters. Change the value of shell attributes and positional parameters, or display the names and values of shell variables. Options: -a Mark variables which are modified or created for export. -b Notify of job termination immediately. -e Exit immediately if a command exits with a non-zero status. -f Disable file name generation (globbing). -h Remember the location of commands as they are looked up. -k All assignment arguments are placed in the environment for a command, not just those that precede the command name. -m Job control is enabled. -n Read commands but do not execute them. -o option-name Set the variable corresponding to option-name: allexport same as -a braceexpand same as -B emacs use an emacs-style line editing interface errexit same as -e errtrace same as -E functrace same as -T hashall same as -h histexpand same as -H history enable command history ignoreeof the shell will not exit upon reading EOF interactive-comments allow comments to appear in interactive commands keyword same as -k monitor same as -m noclobber same as -C noexec same as -n noglob same as -f nolog currently accepted but ignored notify same as -b nounset same as -u onecmd same as -t physical same as -P pipefail the return value of a pipeline is the status of the last command to exit with a non-zero status, or zero if no command exited with a non-zero status posix change the behaviour of bash where the default operation differs from the Posix standard to match the standard privileged same as -p verbose same as -v vi use a vi-style line editing interface xtrace same as -x -p Turned on whenever the real and effective user ids do not match. Disables processing of the $ENV file and importing of shell functions. Turning this option off causes the effective uid and gid to be set to the real uid and gid. -t Exit after reading and executing one command. -u Treat unset variables as an error when substituting. -v Print shell input lines as they are read. -x Print commands and their arguments as they are executed. -B the shell will perform brace expansion -C If set, disallow existing regular files to be overwritten by redirection of output. -E If set, the ERR trap is inherited by shell functions. -H Enable ! style history substitution. This flag is on by default when the shell is interactive. -P If set, do not follow symbolic links when executing commands such as cd which change the current directory. -T If set, the DEBUG trap is inherited by shell functions. - Assign any remaining arguments to the positional parameters. The -x and -v options are turned off. Using + rather than - causes these flags to be turned off. The flags can also be used upon invocation of the shell. The current set of flags may be found in $-. The remaining n ARGs are positional parameters and are assigned, in order, to $1, $2, .. $n. If no ARGs are given, all shell variables are printed. Exit Status: Returns success unless an invalid option is given.