mailman - en to unknown language translation catalogue (121 entries)

en: 
        password [<oldpassword> <newpassword>] [address=<address>]
            Retrieve or change your password.  With no arguments, this returns
            your current password.  With arguments <oldpassword> and <newpassword>
            you can change your password.
    
            If you're posting from an address other than your membership address,
            specify your membership address with `address=<address>' (no brackets
            around the email address, and no quotes!).  Note that in this case the
            response is always sent to the subscribed address.
target: 
        password [<oldpassword> <newpassword>] [address=<address>]
            Retrieve or change your password.  With no arguments, this returns
            your current password.  With arguments <oldpassword> and <newpassword>
            you can change your password.
    
            If you're posting from an address other than your membership address,
            specify your membership address with `address=<address>' (no brackets
            around the e-mail address, and no quotes!).  Note that in this case the
            response is always sent to the subscribed address.

en: 
        set help
            Show this detailed help.
    
        set show [address=<address>]
            View your current option settings.  If you're posting from an address
            other than your membership address, specify your membership address
            with `address=<address>' (no brackets around the email address, and no
            quotes!).
    
        set authenticate <password> [address=<address>]
            To set any of your options, you must include this command first, along
            with your membership password.  If you're posting from an address
            other than your membership address, specify your membership address
            with `address=<address>' (no brackets around the email address, and no
            quotes!).
    
        set ack on
        set ack off
            When the `ack' option is turned on, you will receive an
            acknowledgement message whenever you post a message to the list.
    
        set digest plain
        set digest mime
        set digest off
            When the `digest' option is turned off, you will receive postings
            immediately when they are posted.  Use `set digest plain' if instead
            you want to receive postings bundled into a plain text digest
            (i.e. RFC 1153 digest).  Use `set digest mime' if instead you want to
            receive postings bundled together into a MIME digest.
    
        set delivery on
        set delivery off
            Turn delivery on or off.  This does not unsubscribe you, but instead
            tells Mailman not to deliver messages to you for now.  This is useful
            if you're going on vacation.  Be sure to use `set delivery on' when
            you return from vacation!
    
        set myposts on
        set myposts off
            Use `set myposts off' to not receive copies of messages you post to
            the list.  This has no effect if you're receiving digests.
    
        set hide on
        set hide off
            Use `set hide on' to conceal your email address when people request
            the membership list.
    
        set duplicates on
        set duplicates off
            Use `set duplicates off' if you want Mailman to not send you messages
            if your address is explicitly mentioned in the To: or Cc: fields of
            the message.  This can reduce the number of duplicate postings you
            will receive.
    
        set reminders on
        set reminders off
            Use `set reminders off' if you want to disable the monthly password
            reminder for this mailing list.
target: 
        set help
            Show this detailed help.
    
        set show [address=<address>]
            View your current option settings.  If you're posting from an address
            other than your membership address, specify your membership address
            with `address=<address>' (no brackets around the e-mail address, and no
            quotes!).
    
        set authenticate <password> [address=<address>]
            To set any of your options, you must include this command first, along
            with your membership password.  If you're posting from an address
            other than your membership address, specify your membership address
            with `address=<address>' (no brackets around the e-mail address, and no
            quotes!).
    
        set ack on
        set ack off
            When the `ack' option is turned on, you will receive an
            acknowledgement message whenever you post a message to the list.
    
        set digest plain
        set digest mime
        set digest off
            When the `digest' option is turned off, you will receive postings
            immediately when they are posted.  Use `set digest plain' if instead
            you want to receive postings bundled into a plain text digest
            (i.e. RFC 1153 digest).  Use `set digest mime' if instead you want to
            receive postings bundled together into a MIME digest.
    
        set delivery on
        set delivery off
            Turn delivery on or off.  This does not unsubscribe you, but instead
            tells Mailman not to deliver messages to you for now.  This is useful
            if you're going on vacation.  Be sure to use `set delivery on' when
            you return from vacation!
    
        set myposts on
        set myposts off
            Use `set myposts off' to not receive copies of messages you post to
            the list.  This has no effect if you're receiving digests.
    
        set hide on
        set hide off
            Use `set hide on' to conceal your e-mail address when people request
            the membership list.
    
        set duplicates on
        set duplicates off
            Use `set duplicates off' if you want Mailman to not send you messages
            if your address is explicitly mentioned in the To: or Cc: fields of
            the message.  This can reduce the number of duplicate postings you
            will receive.
    
        set reminders on
        set reminders off
            Use `set reminders off' if you want to disable the monthly password
            reminder for this mailing list.

en: 
        subscribe [password] [digest|nodigest] [address=<address>]
            Subscribe to this mailing list.  Your password must be given to
            unsubscribe or change your options, but if you omit the password, one
            will be generated for you.  You may be periodically reminded of your
            password.
    
            The next argument may be either: `nodigest' or `digest' (no quotes!).
            If you wish to subscribe an address other than the address you sent
            this request from, you may specify `address=<address>' (no brackets
            around the email address, and no quotes!)
target: 
        subscribe [password] [digest|nodigest] [address=<address>]
            Subscribe to this mailing list.  Your password must be given to
            unsubscribe or change your options, but if you omit the password, one
            will be generated for you.  You may be periodically reminded of your
            password.
    
            The next argument may be either: `nodigest' or `digest' (no quotes!).
            If you wish to subscribe an address other than the address you sent
            this request from, you may specify `address=<address>' (no brackets
            around the e-mail address, and no quotes!)

en: 
        unsubscribe [password] [address=<address>]
            Unsubscribe from the mailing list.  If given, your password must match
            your current password.  If omitted, a confirmation email will be sent
            to the unsubscribing address. If you wish to unsubscribe an address
            other than the address you sent this request from, you may specify
            `address=<address>' (no brackets around the email address, and no
            quotes!)
target: 
        unsubscribe [password] [address=<address>]
            Unsubscribe from the mailing list.  If given, your password must match
            your current password.  If omitted, a confirmation e-mail will be sent
            to the unsubscribing address. If you wish to unsubscribe an address
            other than the address you sent this request from, you may specify
            `address=<address>' (no brackets around the e-mail address, and no
            quotes!)

en: 
    Check a given Mailman translation, making sure that variables and
    tags referenced in translation are the same variables and tags in
    the original templates and catalog.
    
    Usage:
    
    cd $MAILMAN_DIR
    %(program)s [-q] <lang>
    
    Where <lang> is your country code (e.g. 'it' for Italy) and -q is
    to ask for a brief summary.
target: 
    Check a given Mailman translation, making sure that variables and
    tags referenced in translation are the same variables and tags in
    the original templates and catalogue.
    
    Usage:
    
    cd $MAILMAN_DIR
    %(program)s [-q] <lang>
    
    Where <lang> is your country code (e.g. 'it' for Italy) and -q is
    to ask for a brief summary.

en:             You have successfully canceled the posting of your message with
                the Subject: header <em>%(subject)s</em> to the mailing list
                %(listname)s.
target:             You have successfully cancelled the posting of your message with
                the Subject: header <em>%(subject)s</em> to the mailing list
                %(listname)s.

en:             You have successfully confirmed your subscription request for
                "%(addr)s" to the %(listname)s mailing list.  A separate
                confirmation message will be sent to your email address, along
                with your password, and other useful information and links.
    
                <p>You can now
                <a href="%(optionsurl)s">proceed to your membership login
                page</a>.
target:             You have successfully confirmed your subscription request for
                "%(addr)s" to the %(listname)s mailing list.  A separate
                confirmation message will be sent to your e-mail address, along
                with your password, and other useful information and links.
    
                <p>You can now
                <a href="%(optionsurl)s">proceed to your membership login
                page</a>.

en:  (but we obscure the addresses so they are not
                    easily recognizable by spammers).
target:  (but we obscure the addresses so they are not
                    easily recognisable by spammers).

en:  (requires authorization)
target:  (requires authorisation)

en:  If you leave the field blank, you will be prompted for
            your email address
target:  If you leave the field blank, you will be prompted for
            your e-mail address

en: <p>%(note)s
    
                <p>You may have disabled list delivery intentionally,
                or it may have been triggered by bounces from your email
                address.  In either case, to re-enable delivery, change the
                %(link)s option below.  Contact %(mailto)s if you have any
                questions or need assistance.
target: <p>%(note)s
    
                <p>You may have disabled list delivery intentionally,
                or it may have been triggered by bounces from your e-mail
                address.  In either case, to re-enable delivery, change the
                %(link)s option below.  Contact %(mailto)s if you have any
                questions or need assistance.

en: A reminder of your password has been emailed to you.
target: A reminder of your password has been e-mailed to you.

en: An introductory description - a few paragraphs - about the
                 list.  It will be included, as html, at the top of the listinfo
                 page.  Carriage returns will end a paragraph - see the details
                 for more info.
target: An introductory description - a few paragraphs - about the
                 list.  It will be included, as HTML, at the top of the listinfo
                 page.  Carriage returns will end a paragraph - see the details
                 for more info.

en: Authorization failed.
target: Authorisation failed.

en: Auto-response text to send to -request emails.
target: Auto-response text to send to -request e-mails.

en: Bad email address for option %(k)s: %(v)s
target: Bad e-mail address for option %(k)s: %(v)s

en: Bad email address for option %(property)s: %(val)s
target: Bad e-mail address for option %(property)s: %(val)s

en: Bad email address provided
target: Bad e-mail address provided

en: Bad owner email address: %(s)s
target: Bad owner e-mail address: %(s)s

en: Bad/Invalid email address
target: Bad/Invalid e-mail address

en: Bad/Invalid email address: %(member)s
target: Bad/Invalid e-mail address: %(member)s

en: Bad/Invalid email address: blank line
target: Bad/Invalid e-mail address: blank line

en: By clicking on the <em>Remind</em> button, your
        password will be emailed to you.
target: By clicking on the <em>Remind</em> button, your
        password will be e-mailed to you.

en: By clicking on the <em>Unsubscribe</em> button, a
        confirmation message will be emailed to you.  This message will have a
        link that you should click on to complete the removal process (you can
        also confirm by email; see the instructions in the confirmation
        message).
target: By clicking on the <em>Unsubscribe</em> button, a
        confirmation message will be e-mailed to you.  This message will have a
        link that you should click on to complete the removal process (you can
        also confirm by e-mail; see the instructions in the confirmation
        message).

en: Can't have empty html page.
target: Can't have an empty HTML page.

en: Confirm (*) - email confirmation required <br>
                               Require approval - require list administrator
                               approval for subscriptions <br>
                               Confirm and approve - both confirm and approve
                               
                               <p>(*) when someone requests a subscription,
                               Mailman sends them a notice with a unique
                               subscription request number that they must reply to
                               in order to subscribe.<br> This prevents
                               mischievous (or malicious) people from creating
                               subscriptions for others without their consent.
target: Confirm (*) - e-mail confirmation required <br>
                               Require approval - require list administrator
                               approval for subscriptions <br>
                               Confirm and approve - both confirm and approve
                               
                               <p>(*) when someone requests a subscription,
                               Mailman sends them a notice with a unique
                               subscription request number that they must reply to
                               in order to subscribe.<br> This prevents
                               mischievous (or malicious) people from creating
                               subscriptions for others without their consent.

en: Confirmation from your email address is required, to prevent anyone from
    subscribing you without permission.  Instructions are being sent to you at
    %(email)s.  Please note your subscription will not start until you confirm
    your subscription.
target: Confirmation from your e-mail address is required, to prevent anyone from
    subscribing you without permission.  Instructions are being sent to you at
    %(email)s.  Please note your subscription will not start until you confirm
    your subscription.

en: Create a new, unpopulated mailing list.
    
    Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]
    
    Options:
    
        -l language
        --language=language
            Make the list's preferred language `language', which must be a two
            letter language code.
    
        -u urlhost
        --urlhost=urlhost
            Gives the list's web interface host name.
    
        -e emailhost
        --emailhost=emailhost
            Gives the list's email domain name.
    
        -q/--quiet
            Normally the administrator is notified by email (after a prompt) that
            their list has been created.  This option suppresses the prompt and
            notification.
    
        -h/--help
            Print this help text and exit.
    
    You can specify as many of the arguments as you want on the command line:
    you will be prompted for the missing ones.
    
    Every Mailman list has two parameters which define the default host name for
    outgoing email, and the default URL for all web interfaces.  When you
    configured Mailman, certain defaults were calculated, but if you are running
    multiple virtual Mailman sites, then the defaults may not be appropriate for
    the list you are creating.
    
    You also specify the domain to create your new list in by typing the command
    like so:
    
        newlist --urlhost=www.mydom.ain mylist
    
    where `www.mydom.ain' should be the base hostname for the URL to this virtual
    hosts's lists.  E.g. with this setting people will view the general list
    overviews at http://www.mydom.ain/mailman/listinfo.  Also, www.mydom.ain
    should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if
    the email hostname to be automatically determined.
    
    If you want the email hostname to be different from the one looked up by the
    VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can specify
    `emailhost' like so:
    
        newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist
    
    where `mydom.ain' is the mail domain name. If you don't specify emailhost but
    urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST will
    be used for the email interface.
    
    For backward compatibility, you can also specify the domain to create your
    new list in by spelling the listname like so:
    
        mylist@www.mydom.ain
    
    where www.mydom.ain is used for `urlhost' but it will also be used for
    `emailhost' if it is not found in the virtual host table. Note that
    '--urlhost' and '--emailhost' have precedence to this notation.
    
    If you spell the list name as just `mylist', then the email hostname will be
    taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL (as
    defined in your Defaults.py file or overridden by settings in mm_cfg.py).
    
    Note that listnames are forced to lowercase.
target: Create a new, unpopulated mailing list.
    
    Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]
    
    Options:
    
        -l language
        --language=language
            Make the list's preferred language `language', which must be a two
            letter language code.
    
        -u urlhost
        --urlhost=urlhost
            Gives the list's Web interface host name.
    
        -e e-mailhost
        --emailhost=e-mailhost
            Gives the list's e-mail domain name.
    
        -q/--quiet
            Normally the administrator is notified by e-mail (after a prompt) that
            their list has been created.  This option suppresses the prompt and
            notification.
    
        -h/--help
            Print this help text and exit.
    
    You can specify as many of the arguments as you want on the command line:
    you will be prompted for the missing ones.
    
    Every Mailman list has two parameters which define the default host name for
    outgoing e-mail, and the default URL for all Web interfaces.  When you
    configured Mailman, certain defaults were calculated, but if you are running
    multiple virtual Mailman sites, then the defaults may not be appropriate for
    the list you are creating.
    
    You also specify the domain to create your new list in by typing the command
    like so:
    
        newlist --urlhost=www.mydom.ain mylist
    
    where `www.mydom.ain' should be the base hostname for the URL to this virtual
    hosts's lists.  E.g. with this setting people will view the general list
    overviews at http://www.mydom.ain/mailman/listinfo.  Also, www.mydom.ain
    should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if
    the e-mail hostname to be automatically determined.
    
    If you want the e-mail hostname to be different from the one looked up by the
    VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can specify
    `emailhost' like so:
    
        newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist
    
    where `mydom.ain' is the mail domain name. If you don't specify emailhost but
    urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST will
    be used for the e-mail interface.
    
    For backward compatibility, you can also specify the domain to create your
    new list in by spelling the listname like so:
    
        mylist@www.mydom.ain
    
    where www.mydom.ain is used for `urlhost' but it will also be used for
    `emailhost' if it is not found in the virtual host table. Note that
    '--urlhost' and '--emailhost' have precedence to this notation.
    
    If you spell the list name as just `mylist', then the e-mail hostname will be
    taken from DEFAULT_EMAIL_HOST and the URL will be taken from DEFAULT_URL (as
    defined in your Defaults.py file or overridden by settings in mm_cfg.py).
    
    Note that listnames are forced to lowercase.

en: Cull bad and shunt queues, recommended once per day.
    
    This script goes through the 'bad' and 'shunt' queue directories and,
    if mm_cfg.BAD_SHUNT_STALE_AFTER is > 0, it removes all files more than
    that many seconds old.
    
    If mm_cfg.BAD_SHUNT_ARCHIVE_DIRECTORY is a writable directory, the old
    files are moved there. Otherwise they are deleted.
    
    Only regular files immediately subordinate to the 'bad' and 'shunt'
    directories are processed. Anything else is skipped.
    
    Usage: %(PROGRAM)s [options]
    
    Options:
        -h / --help
            Print this message and exit.
target: Cull bad and shunt queues, recommended once per day.
    
    This script goes through the 'bad' and 'shunt' queue directories and,
    if mm_cfg.BAD_SHUNT_STALE_AFTER is > 0, it removes all files more than
    that many seconds old.
    
    If mm_cfg.BAD_SHUNT_ARCHIVE_DIRECTORY is a writeable directory, the old
    files are moved there. Otherwise they are deleted.
    
    Only regular files immediately subordinate to the 'bad' and 'shunt'
    directories are processed. Anything else is skipped.
    
    Usage: %(PROGRAM)s [options]
    
    Options:
        -h / --help
            Print this message and exit.

en: Email My Password To Me
target: E-mail My Password To Me

en: Email address:
target: E-mail address:

en: Enter the email of the person running the list:
target: Enter the e-mail of the person running the list:

en: Finalizing
target: Finalising

en: Full Personalization
target: Full Personalisation

en: Fundamental list characteristics, including descriptive
                info and basic behaviors.
target: Fundamental list characteristics, including descriptive
                info and basic behaviours.

en: Generate binary message catalog from textual translation description.
    
    This program converts a textual Uniforum-style message catalog (.po file) into
    a binary GNU catalog (.mo file).  This is essentially the same function as the
    GNU msgfmt program, however, it is a simpler implementation.
    
    Usage: msgfmt.py [OPTIONS] filename.po
    
    Options:
        -o file
        --output-file=file
            Specify the output file to write to.  If omitted, output will go to a
            file named filename.mo (based off the input file name).
    
        -h
        --help
            Print this message and exit.
    
        -V
        --version
            Display version information and exit.
target: Generate binary message catalogue from textual translation description.
    
    This program converts a textual Uniforum-style message catalogue (.po file) into
    a binary GNU catalogue (.mo file).  This is essentially the same function as the
    GNU msgfmt program, however, it is a simpler implementation.
    
    Usage: msgfmt.py [OPTIONS] filename.po
    
    Options:
        -o file
        --output-file=file
            Specify the output file to write to.  If omitted, output will go to a
            file named filename.mo (based on the input file name).
    
        -h
        --help
            Print this message and exit.
    
        -V
        --version
            Display version information and exit.

en: Host name this list prefers for email.
target: Host name this list prefers for e-mail.

en: Illegal Email Address: %(safeuser)s
target: Illegal E-mail Address: %(safeuser)s

en: Illegal email address provided
target: Illegal e-mail address provided

en: In order to change your membership option, you must
        first log in by giving your %(extra)smembership password in the section
        below.  If you don't remember your membership password, you can have it
        emailed to you by clicking on the button below.  If you just want to
        unsubscribe from this list, click on the <em>Unsubscribe</em> button and a
        confirmation message will be sent to you.
    
        <p><strong><em>Important:</em></strong> From this point on, you must have
        cookies enabled in your browser, otherwise none of your changes will take
        effect.
target: In order to change your membership option, you must
        first log in by giving your %(extra)smembership password in the section
        below.  If you don't remember your membership password, you can have it
        e-mailed to you by clicking on the button below.  If you just want to
        unsubscribe from this list, click on the <em>Unsubscribe</em> button and a
        confirmation message will be sent to you.
    
        <p><strong><em>Important:</em></strong> From this point on, you must have
        cookies enabled in your browser, otherwise none of your changes will take
        effect.

en: List the owners of a mailing list, or all mailing lists.
    
    Usage: %(PROGRAM)s [options] [listname ...]
    Options:
    
        -w / --with-listnames
            Group the owners by list names and include the list names in the
            output.  Otherwise, the owners will be sorted and uniquified based on
            the email address.
    
        -m / --moderators
            Include the list moderators in the output.
    
        -h / --help
            Print this help message and exit.
    
        listname
            Print the owners of the specified lists.  More than one can appear
            after the options.  If there are no listnames provided, the owners of
            all the lists will be displayed.
target: List the owners of a mailing list, or all mailing lists.
    
    Usage: %(PROGRAM)s [options] [listname ...]
    Options:
    
        -w / --with-listnames
            Group the owners by list names and include the list names in the
            output.  Otherwise, the owners will be sorted and uniquified based on
            the e-mail address.
    
        -m / --moderators
            Include the list moderators in the output.
    
        -h / --help
            Print this help message and exit.
    
        listname
            Print the owners of the specified lists.  More than one can appear
            after the options.  If there are no listnames provided, the owners of
            all the lists will be displayed.

en: List-specific text prepended to new-subscriber welcome
                 message
target: List-specific text prefixed to new-subscriber welcome
                 message

en: Mailman prefixes <tt>Subject:</tt> headers with
                 <a href="?VARHELP=general/subject_prefix">text you can
                 customize</a> and normally, this prefix shows up in messages
                 gatewayed to Usenet.  You can set this option to <em>No</em> to
                 disable the prefix on gated messages.  Of course, if you turn off
                 normal <tt>Subject:</tt> prefixes, they won't be prefixed for
                 gated messages either.
target: Mailman prefixes <tt>Subject:</tt> headers with
                 <a href="?VARHELP=general/subject_prefix">text you can
                 customise</a> and normally, this prefix shows up in messages
                 gatewayed to Usenet.  You can set this option to <em>No</em> to
                 disable the prefix on gated messages.  Of course, if you turn off
                 normal <tt>Subject:</tt> prefixes, they won't be prefixed for
                 gated messages either.

en: Mailman won't accept the given email address as a valid address.
    (E.g. it must have an @ in it.)
target: Mailman won't accept the given e-mail address as a valid address.
    (E.g. it must have an @ in it.)

en: Natural language (internationalization) options.
target: Natural language (internationalisation) options.

en: None - no verification steps (<em>Not
                               Recommended </em>)<br>
                               Confirm (*) - email confirmation step required <br>
                               Require approval - require list administrator
                               Approval for subscriptions <br>
                               Confirm and approve - both confirm and approve
                               
                               <p>(*) when someone requests a subscription,
                               Mailman sends them a notice with a unique
                               subscription request number that they must reply to
                               in order to subscribe.<br>
    
                               This prevents mischievous (or malicious) people
                               from creating subscriptions for others without
                               their consent.
target: None - no verification steps (<em>Not
                               Recommended </em>)<br>
                               Confirm (*) - e-mail confirmation step required <br>
                               Require approval - require list administrator
                               Approval for subscriptions <br>
                               Confirm and approve - both confirm and approve
                               
                               <p>(*) when someone requests a subscription,
                               Mailman sends them a notice with a unique
                               subscription request number that they must reply to
                               in order to subscribe.<br>
    
                               This prevents mischievous (or malicious) people
                               from creating subscriptions for others without
                               their consent.

en: Normally, Mailman sends the regular delivery messages to
                     the mail server in batches.  This is much more efficent
                     because it reduces the amount of traffic between Mailman and
                     the mail server.
    
                     <p>However, some lists can benefit from a more personalized
                     approach.  In this case, Mailman crafts a new message for
                     each member on the regular delivery list.  Turning this
                     feature on may degrade the performance of your site, so you
                     need to carefully consider whether the trade-off is worth it,
                     or whether there are other ways to accomplish what you want.
                     You should also carefully monitor your system load to make
                     sure it is acceptable.
    
                     <p>Select <em>No</em> to disable personalization and send
                     messages to the members in batches.  Select <em>Yes</em> to
                     personalize deliveries and allow additional substitution
                     variables in message headers and footers (see below).  In
                     addition, by selecting <em>Full Personalization</em>, the
                     <code>To</code> header of posted messages will be modified to
                     include the member's address instead of the list's posting
                     address.
    
                     <p>When personalization is enabled, a few more expansion
                     variables that can be included in the <a
                     href="?VARHELP=nondigest/msg_header">message header</a> and
                     <a href="?VARHELP=nondigest/msg_footer">message footer</a>.
    
                     <p>These additional substitution variables will be available
                     for your headers and footers, when this feature is enabled:
    
                     <ul><li><b>user_address</b> - The address of the user,
                             coerced to lower case.
                         <li><b>user_delivered_to</b> - The case-preserved address
                             that the user is subscribed with.
                         <li><b>user_password</b> - The user's password.
                         <li><b>user_name</b> - The user's full name.
                         <li><b>user_optionsurl</b> - The url to the user's option
                             page.
                     </ul>
target: Normally, Mailman sends the regular delivery messages to
                     the mail server in batches.  This is much more efficent
                     because it reduces the amount of traffic between Mailman and
                     the mail server.
    
                     <p>However, some lists can benefit from a more personalised
                     approach.  In this case, Mailman crafts a new message for
                     each member on the regular delivery list.  Turning this
                     feature on may degrade the performance of your site, so you
                     need to carefully consider whether the trade-off is worth it,
                     or whether there are other ways to accomplish what you want.
                     You should also carefully monitor your system load to make
                     sure it is acceptable.
    
                     <p>Select <em>No</em> to disable personalisation and send
                     messages to the members in batches.  Select <em>Yes</em> to
                     personalise deliveries and allow additional substitution
                     variables in message headers and footers (see below).  In
                     addition, by selecting <em>Full Personalisation</em>, the
                     <code>To</code> header of posted messages will be modified to
                     include the member's address instead of the list's posting
                     address.
    
                     <p>When personalisation is enabled, a few more expansion
                     variables can be included in the <a
                     href="?VARHELP=nondigest/msg_header">message header</a> and
                     <a href="?VARHELP=nondigest/msg_footer">message footer</a>.
    
                     <p>These additional substitution variables will be available
                     for your headers and footers, when this feature is enabled:
    
                     <ul><li><b>user_address</b> - The address of the user,
                             coerced to lower case.
                         <li><b>user_delivered_to</b> - The case-preserved address
                             that the user is subscribed with.
                         <li><b>user_password</b> - The user's password.
                         <li><b>user_name</b> - The user's full name.
                         <li><b>user_optionsurl</b> - The URL to the user's option
                             page.
                     </ul>

en: Not a valid email address: %(toaddr)s
target: Not a valid e-mail address: %(toaddr)s

en: Once a month, your password will be emailed to you as a reminder.
target: Once a month, your password will be e-mailed to you as a reminder.

en: Please enter the confirmation string
        (i.e. <em>cookie</em>) that you received in your email message, in the box
        below.  Then hit the <em>Submit</em> button to proceed to the next
        confirmation step.
target: Please enter the confirmation string
        (i.e. <em>cookie</em>) that you received in your e-mail message, in the box
        below.  Then hit the <em>Submit</em> button to proceed to the next
        confirmation step.

en: Posted message canceled
target: Posted message cancelled

en: Run one or more qrunners, once or repeatedly.
    
    Each named runner class is run in round-robin fashion.  In other words, the
    first named runner is run to consume all the files currently in its
    directory.  When that qrunner is done, the next one is run to consume all the
    files in /its/ directory, and so on.  The number of total iterations can be
    given on the command line.
    
    Usage: %(PROGRAM)s [options]
    
    Options:
    
        -r runner[:slice:range]
        --runner=runner[:slice:range]
            Run the named qrunner, which must be one of the strings returned by
            the -l option.  Optional slice:range if given, is used to assign
            multiple qrunner processes to a queue.  range is the total number of
            qrunners for this queue while slice is the number of this qrunner from
            [0..range).
    
            If using the slice:range form, you better make sure that each qrunner
            for the queue is given the same range value.  If slice:runner is not
            given, then 1:1 is used.
    
            Multiple -r options may be given, in which case each qrunner will run
            once in round-robin fashion.  The special runner `All' is shorthand
            for a qrunner for each listed by the -l option.
    
        --once
        -o
            Run each named qrunner exactly once through its main loop.  Otherwise,
            each qrunner runs indefinitely, until the process receives a SIGTERM
            or SIGINT.
    
        -l/--list
            Shows the available qrunner names and exit.
    
        -v/--verbose
            Spit out more debugging information to the logs/qrunner log file.
    
        -s/--subproc
            This should only be used when running qrunner as a subprocess of the
            mailmanctl startup script.  It changes some of the exit-on-error
            behavior to work better with that framework.
    
        -h/--help
            Print this message and exit.
    
    runner is required unless -l or -h is given, and it must be one of the names
    displayed by the -l switch.
    
    Note also that this script should be started up from mailmanctl as a normal
    operation.  It is only useful for debugging if it is run separately.
target: Run one or more qrunners, once or repeatedly.
    
    Each named runner class is run in round-robin fashion.  In other words, the
    first named runner is run to consume all the files currently in its
    directory.  When that qrunner is done, the next one is run to consume all the
    files in /its/ directory, and so on.  The number of total iterations can be
    given on the command line.
    
    Usage: %(PROGRAM)s [options]
    
    Options:
    
        -r runner[:slice:range]
        --runner=runner[:slice:range]
            Run the named qrunner, which must be one of the strings returned by
            the -l option.  Optional slice:range if given, is used to assign
            multiple qrunner processes to a queue.  range is the total number of
            qrunners for this queue while slice is the number of this qrunner from
            [0..range).
    
            If using the slice:range form, you better make sure that each qrunner
            for the queue is given the same range value.  If slice:runner is not
            given, then 1:1 is used.
    
            Multiple -r options may be given, in which case each qrunner will run
            once in round-robin fashion.  The special runner `All' is shorthand
            for a qrunner for each listed by the -l option.
    
        --once
        -o
            Run each named qrunner exactly once through its main loop.  Otherwise,
            each qrunner runs indefinitely, until the process receives a SIGTERM
            or SIGINT.
    
        -l/--list
            Shows the available qrunner names and exit.
    
        -v/--verbose
            Spit out more debugging information to the logs/qrunner log file.
    
        -s/--subproc
            This should only be used when running qrunner as a subprocess of the
            mailmanctl startup script.  It changes some of the exit-on-error
            behaviour to work better with that framework.
    
        -h/--help
            Print this message and exit.
    
    runner is required unless -l or -h is given, and it must be one of the names
    displayed by the -l switch.
    
    Note also that this script should be started up from mailmanctl as a normal
    operation.  It is only useful for debugging if it is run separately.

en: Send "list created" email to list owner?
target: Send "list created" e-mail to list owner?

en: Send password reminders for all lists to all users.
    
    This program scans all mailing lists and collects users and their passwords,
    grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true.  Then
    one email message is sent to each unique user (per-virtual host) containing
    the list passwords and options url for the user.  The password reminder comes
    from the mm_cfg.MAILMAN_SITE_LIST, which must exist.
    
    Usage: %(PROGRAM)s [options]
    
    Options:
        -l listname
        --listname=listname
            Send password reminders for the named list only.  If omitted,
            reminders are sent for all lists.  Multiple -l/--listname options are
            allowed.
    
        -h/--help
            Print this message and exit.
target: Send password reminders for all lists to all users.
    
    This program scans all mailing lists and collects users and their passwords,
    grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true.  Then
    one e-mail message is sent to each unique user (per-virtual host) containing
    the list passwords and options url for the user.  The password reminder comes
    from the mm_cfg.MAILMAN_SITE_LIST, which must exist.
    
    Usage: %(PROGRAM)s [options]
    
    Options:
        -l listname
        --listname=listname
            Send password reminders for the named list only.  If omitted,
            reminders are sent for all lists.  Multiple -l/--listname options are
            allowed.
    
        -h/--help
            Print this message and exit.

en: Send welcome messages to new subscribees?
target: Send welcome messages to new subscribers?

en: Sender discarded message via web.
target: Sender discarded message via the Web.

en: Set the site password, prompting from the terminal.
    
    The site password can be used in most if not all places that the list
    administrator's password can be used, which in turn can be used in most places
    that a list users password can be used.
    
    Usage: %(PROGRAM)s [options] [password]
    
    Options:
    
        -c/--listcreator
            Set the list creator password instead of the site password.  The list
            creator is authorized to create and remove lists, but does not have
            the total power of the site administrator.
    
        -h/--help
            Print this help message and exit.
    
    If password is not given on the command line, it will be prompted for.
target: Set the site password, prompting from the terminal.
    
    The site password can be used in most if not all places that the list
    administrator's password can be used, which in turn can be used in most places
    that a list users password can be used.
    
    Usage: %(PROGRAM)s [options] [password]
    
    Options:
    
        -c/--listcreator
            Set the list creator password instead of the site password.  The list
            creator is authorised to create and remove lists, but does not have
            the total power of the site administrator.
    
        -h/--help
            Print this help message and exit.
    
    If password is not given on the command line, it will be prompted for.

en: Setting this option causes member email addresses to be
                 transformed when they are presented on list web pages (both in
                 text and as links), so they're not trivially recognizable as
                 email addresses.  The intention is to prevent the addresses
                 from being snarfed up by automated web scanners for use by
                 spammers.
target: Setting this option causes member e-mail addresses to be
                 transformed when they are presented on list Web pages (both in
                 text and as links), so they're not trivially recognisable as
                 e-mail addresses.  The intention is to prevent the addresses
                 from being snarfed up by automated Web scanners for use by
                 spammers.

en: Should Mailman personalize each non-digest delivery?
                     This is often useful for announce-only lists, but <a
                     href="?VARHELP=nondigest/personalize">read the details</a>
                     section for a discussion of important performance
                     issues.
target: Should Mailman personalise each non-digest delivery?
                     This is often useful for announce-only lists, but <a
                     href="?VARHELP=nondigest/personalize">read the details</a>
                     section for a discussion of important performance
                     issues.

en: Should Mailman send an auto-response to emails sent to the
                 -owner address?
target: Should Mailman send an auto-response to e-mails sent to the
                 -owner address?

en: Should Mailman send an auto-response to emails sent to the
                 -request address?  If you choose yes, decide whether you want
                 Mailman to discard the original email, or forward it on to the
                 system as a normal mail command.
target: Should Mailman send an auto-response to e-mails sent to the
                 -request address?  If you choose yes, decide whether you want
                 Mailman to discard the original e-mail, or forward it on to the
                 system as a normal mail command.

en: Show member addresses so they're not directly recognizable
                 as email addresses?
target: Show member addresses so they're not directly recognisable
                 as e-mail addresses?

en: Slovak
target: Slovakian

en: Synchronize a mailing list's membership with a flat file.
    
    This script is useful if you have a Mailman mailing list and a sendmail
    :include: style list of addresses (also as is used in Majordomo).  For every
    address in the file that does not appear in the mailing list, the address is
    added.  For every address in the mailing list that does not appear in the
    file, the address is removed.  Other options control what happens when an
    address is added or removed.
    
    Usage: %(PROGRAM)s [options] -f file listname
    
    Where `options' are:
    
        --no-change
        -n
            Don't actually make the changes.  Instead, print out what would be
            done to the list.
    
        --welcome-msg[=<yes|no>]
        -w[=<yes|no>]
            Sets whether or not to send the newly added members a welcome
            message, overriding whatever the list's `send_welcome_msg' setting
            is.  With -w=yes or -w, the welcome message is sent.  With -w=no, no
            message is sent.
    
        --goodbye-msg[=<yes|no>]
        -g[=<yes|no>]
            Sets whether or not to send the goodbye message to removed members,
            overriding whatever the list's `send_goodbye_msg' setting is.  With
            -g=yes or -g, the goodbye message is sent.  With -g=no, no message is
            sent.
    
        --digest[=<yes|no>]
        -d[=<yes|no>]
            Selects whether to make newly added members receive messages in
            digests.  With -d=yes or -d, they become digest members.  With -d=no
            (or if no -d option given) they are added as regular members.
    
        --notifyadmin[=<yes|no>]
        -a[=<yes|no>]
            Specifies whether the admin should be notified for each subscription
            or unsubscription.  If you're adding a lot of addresses, you
            definitely want to turn this off!  With -a=yes or -a, the admin is
            notified.  With -a=no, the admin is not notified.  With no -a option,
            the default for the list is used.
    
        --file <filename | ->
        -f <filename | ->
            This option is required.  It specifies the flat file to synchronize
            against.  Email addresses must appear one per line.  If filename is
            `-' then stdin is used.
    
        --help
        -h
            Print this message.
    
        listname
            Required.  This specifies the list to synchronize.
target: Synchronise a mailing list's membership with a flat file.
    
    This script is useful if you have a Mailman mailing list and a sendmail
    :include: style list of addresses (also as is used in Majordomo).  For every
    address in the file that does not appear in the mailing list, the address is
    added.  For every address in the mailing list that does not appear in the
    file, the address is removed.  Other options control what happens when an
    address is added or removed.
    
    Usage: %(PROGRAM)s [options] -f file listname
    
    Where `options' are:
    
        --no-change
        -n
            Don't actually make the changes.  Instead, print out what would be
            done to the list.
    
        --welcome-msg[=<yes|no>]
        -w[=<yes|no>]
            Sets whether or not to send the newly added members a welcome
            message, overriding whatever the list's `send_welcome_msg' setting
            is.  With -w=yes or -w, the welcome message is sent.  With -w=no, no
            message is sent.
    
        --goodbye-msg[=<yes|no>]
        -g[=<yes|no>]
            Sets whether or not to send the goodbye message to removed members,
            overriding whatever the list's `send_goodbye_msg' setting is.  With
            -g=yes or -g, the goodbye message is sent.  With -g=no, no message is
            sent.
    
        --digest[=<yes|no>]
        -d[=<yes|no>]
            Selects whether to make newly added members receive messages in
            digests.  With -d=yes or -d, they become digest members.  With -d=no
            (or if no -d option given) they are added as regular members.
    
        --notifyadmin[=<yes|no>]
        -a[=<yes|no>]
            Specifies whether the admin should be notified for each subscription
            or unsubscription.  If you're adding a lot of addresses, you
            definitely want to turn this off!  With -a=yes or -a, the admin is
            notified.  With -a=no, the admin is not notified.  With no -a option,
            the default for the list is used.
    
        --file <filename | ->
        -f <filename | ->
            This option is required.  It specifies the flat file to synchronise
            against.  E-mail addresses must appear one per line.  If filename is
            `-' then stdin is used.
    
        --help
        -h
            Print this message.
    
        listname
            Required.  This specifies the list to synchronise.

en: The "host_name" is the preferred name for email to
                 mailman-related addresses on this host, and generally should be
                 the mail host's exchanger address, if any.  This setting can be
                 useful for selecting among alternative names of a host that has
                 multiple addresses.
target: The "host_name" is the preferred name for e-mail to
                 mailman-related addresses on this host, and generally should be
                 the mail host's exchanger address, if any.  This setting can be
                 useful for selecting among alternative names of a host that has
                 multiple addresses.

en: The <em>list administrators</em> are the people who have ultimate control over
    all parameters of this mailing list.  They are able to change any list
    configuration variable available through these administration web pages.
    
    <p>The <em>list moderators</em> have more limited permissions; they are not
    able to change any list configuration variable, but they are allowed to tend
    to pending administration requests, including approving or rejecting held
    subscription requests, and disposing of held postings.  Of course, the
    <em>list administrators</em> can also tend to pending requests.
    
    <p>In order to split the list ownership duties into administrators and
    moderators, you must set a separate moderator password in the fields below,
    and also provide the email addresses of the list moderators in the
    <a href="%(adminurl)s/general">general options section</a>.
target: The <em>list administrators</em> are the people who have ultimate control over
    all parameters of this mailing list.  They are able to change any list
    configuration variable available through these administration web pages.
    
    <p>The <em>list moderators</em> have more limited permissions; they are not
    able to change any list configuration variable, but they are allowed to tend
    to pending administration requests, including approving or rejecting held
    subscription requests, and disposing of held postings.  Of course, the
    <em>list administrators</em> can also tend to pending requests.
    
    <p>In order to split the list ownership duties into administrators and
    moderators, you must set a separate moderator password in the fields below,
    and also provide the e-mail addresses of the list moderators in the
    <a href="%(adminurl)s/general">general options section</a>.

en: The attached message was received as a bounce, but either the bounce format
    was not recognized, or no member addresses could be extracted from it.  This
    mailing list has been configured to send all unrecognized bounce messages to
    the list administrator(s).
    
    For more information see:
    %(adminurl)s
target: The attached message was received as a bounce, but either the bounce format
    was not recognised, or no member addresses could be extracted from it.  This
    mailing list has been configured to send all unrecognised bounce messages to
    the list administrator(s).
    
    For more information see:
    %(adminurl)s

en: The capitalization of this name can be changed to make it
                 presentable in polite company as a proper noun, or to make an
                 acronym part all upper case, etc.  However, the name will be
                 advertised as the email address (e.g., in subscribe confirmation
                 notices), so it should <em>not</em> be otherwise altered.  (Email
                 addresses are not case sensitive, but they are sensitive to
                 almost everything else :-)
target: The capitalisation of this name can be changed to make it
                 presentable in polite company as a proper noun, or to make an
                 acronym part all upper case, etc.  However, the name will be
                 advertised as the e-mail address (e.g., in subscribe confirmation
                 notices), so it should <em>not</em> be otherwise altered.  (E-mail
                 addresses are not case-sensitive, but they are sensitive to
                 almost everything else :-)

en: The confirmation email has been sent.
target: The confirmation e-mail has been sent.

en: The email address you supplied is banned from this
            mailing list.  If you think this restriction is erroneous, please
            contact the list owners at %(listowner)s.
target: The e-mail address you supplied is banned from this
            mailing list.  If you think this restriction is erroneous, please
            contact the list owners at %(listowner)s.

en: The email address you supplied is banned from this mailing list.
    If you think this restriction is erroneous, please contact the list
    owners at %(listowner)s.
target: The e-mail address you supplied is banned from this mailing list.
    If you think this restriction is erroneous, please contact the list
    owners at %(listowner)s.

en: The email address you supplied is not valid.  (E.g. it must contain an
    `@'.)
target: The e-mail address you supplied is not valid.  (E.g. it must contain an
    `@'.)

en: The list administrator email addresses.  Multiple
                 administrator addresses, each on separate line is okay.
target: The list administrator e-mail addresses.  Multiple
                 administrator addresses, each on separate line is okay.

en: The list moderator email addresses.  Multiple
                 moderator addresses, each on separate line is okay.
target: The list moderator e-mail addresses.  Multiple
                 moderator addresses, each on separate line is okay.

en: The mailing list `%(listname)s' has been created via the through-the-web
    interface.  In order to complete the activation of this mailing list, the
    proper /etc/aliases (or equivalent) file must be updated.  The program
    `newaliases' may also have to be run.
    
    Here are the entries for the /etc/aliases file:
target: The mailing list `%(listname)s' has been created via the through-the-Web
    interface.  In order to complete the activation of this mailing list, the
    proper /etc/aliases (or equivalent) file must be updated.  The program
    `newaliases' may also have to be run.
    
    Here are the entries for the /etc/aliases file:

en: The mailing list `%(listname)s' has been removed via the through-the-web
    interface.  In order to complete the de-activation of this mailing list, the
    appropriate /etc/aliases (or equivalent) file must be updated.  The program
    `newaliases' may also have to be run.
    
    Here are the entries in the /etc/aliases file that should be removed:
target: The mailing list `%(listname)s' has been removed via the through-the-Web
    interface.  In order to complete the de-activation of this mailing list, the
    appropriate /etc/aliases (or equivalent) file must be updated.  The program
    `newaliases' may also have to be run.
    
    Here are the entries in the /etc/aliases file that should be removed:

en: The results of your email command are provided below.
    Attached is your original message.
target: The results of your e-mail command are provided below.
    Attached is your original message.

en: The results of your email commands
target: The results of your e-mail commands

en: The text will be treated as html <em>except</em> that
                 newlines will be translated to &lt;br&gt; - so you can use links,
                 preformatted text, etc, but don't put in carriage returns except
                 where you mean to separate paragraphs.  And review your changes -
                 bad html (like some unterminated HTML constructs) can prevent
                 display of the entire listinfo page.
target: The text will be treated as HTML <em>except</em> that
                 newlines will be translated to &lt;br&gt; - so you can use links,
                 preformatted text, etc, but don't put in carriage returns except
                 where you mean to separate paragraphs.  And review your changes -
                 bad HTML (like some unterminated HTML constructs) can prevent
                 display of the entire listinfo page.

en: The topic filter categorizes each incoming email message
                 according to <a
                href="http://docs.python.org/library/re.html">regular
                 expression filters</a> you specify below.  If the message's
                 <code>Subject:</code> or <code>Keywords:</code> header contains a
                 match against a topic filter, the message is logically placed
                 into a topic <em>bucket</em>.  Each user can then choose to only
                 receive messages from the mailing list for a particular topic
                 bucket (or buckets).  Any message not categorized in a topic
                 bucket registered with the user is not delivered to the list.
    
                 <p>Note that this feature only works with regular delivery, not
                 digest delivery.
    
                 <p>The body of the message can also be optionally scanned for
                 <code>Subject:</code> and <code>Keywords:</code> headers, as
                 specified by the <a
           href="?VARHELP=topics/topics_bodylines_limit">topics_bodylines_limit</a>
                 configuration variable.
target: The topic filter categorises each incoming e-mail message
                 according to <a
                href="http://docs.python.org/library/re.html">regular
                 expression filters</a> you specify below.  If the message's
                 <code>Subject:</code> or <code>Keywords:</code> header contains a
                 match against a topic filter, the message is logically placed
                 into a topic <em>bucket</em>.  Each user can then choose to only
                 receive messages from the mailing list for a particular topic
                 bucket (or buckets).  Any message not categorised in a topic
                 bucket registered with the user is not delivered to the list.
    
                 <p>Note that this feature only works with regular delivery, not
                 digest delivery.
    
                 <p>The body of the message can also be optionally scanned for
                 <code>Subject:</code> and <code>Keywords:</code> headers, as
                 specified by the <a
           href="?VARHELP=topics/topics_bodylines_limit">topics_bodylines_limit</a>
                 configuration variable.

en: There are two ownership roles associated with each mailing
                 list.  The <em>list administrators</em> are the people who have
                 ultimate control over all parameters of this mailing list.  They
                 are able to change any list configuration variable available
                 through these administration web pages.
    
                 <p>The <em>list moderators</em> have more limited permissions;
                 they are not able to change any list configuration variable, but
                 they are allowed to tend to pending administration requests,
                 including approving or rejecting held subscription requests, and
                 disposing of held postings.  Of course, the <em>list
                 administrators</em> can also tend to pending requests.
    
                 <p>In order to split the list ownership duties into
                 administrators and moderators, you must
                 <a href="passwords">set a separate moderator password</a>,
                 and also provide the <a href="?VARHELP=general/moderator">email
                 addresses of the list moderators</a>.  Note that the field you
                 are changing here specifies the list administrators.
target: There are two ownership roles associated with each mailing
                 list.  The <em>list administrators</em> are the people who have
                 ultimate control over all parameters of this mailing list.  They
                 are able to change any list configuration variable available
                 through these administration Web pages.
    
                 <p>The <em>list moderators</em> have more limited permissions;
                 they are not able to change any list configuration variable, but
                 they are allowed to tend to pending administration requests,
                 including approving or rejecting held subscription requests, and
                 disposing of held postings.  Of course, the <em>list
                 administrators</em> can also tend to pending requests.
    
                 <p>In order to split the list ownership duties into
                 administrators and moderators, you must
                 <a href="passwords">set a separate moderator password</a>,
                 and also provide the <a href="?VARHELP=general/moderator">e-mail
                 addresses of the list moderators</a>.  Note that the field you
                 are changing here specifies the list administrators.

en: There are two ownership roles associated with each mailing
                 list.  The <em>list administrators</em> are the people who have
                 ultimate control over all parameters of this mailing list.  They
                 are able to change any list configuration variable available
                 through these administration web pages.
    
                 <p>The <em>list moderators</em> have more limited permissions;
                 they are not able to change any list configuration variable, but
                 they are allowed to tend to pending administration requests,
                 including approving or rejecting held subscription requests, and
                 disposing of held postings.  Of course, the <em>list
                 administrators</em> can also tend to pending requests.
    
                 <p>In order to split the list ownership duties into
                 administrators and moderators, you must
                 <a href="passwords">set a separate moderator password</a>,
                 and also provide the email addresses of the list moderators in
                 this section.  Note that the field you are changing here
                 specifies the list moderators.
target: There are two ownership roles associated with each mailing
                 list.  The <em>list administrators</em> are the people who have
                 ultimate control over all parameters of this mailing list.  They
                 are able to change any list configuration variable available
                 through these administration Web pages.
    
                 <p>The <em>list moderators</em> have more limited permissions;
                 they are not able to change any list configuration variable, but
                 they are allowed to tend to pending administration requests,
                 including approving or rejecting held subscription requests, and
                 disposing of held postings.  Of course, the <em>list
                 administrators</em> can also tend to pending requests.
    
                 <p>In order to split the list ownership duties into
                 administrators and moderators, you must
                 <a href="passwords">set a separate moderator password</a>,
                 and also provide the e-mail addresses of the list moderators in
                 this section.  Note that the field you are changing here
                 specifies the list moderators.

en: This is a closed list, which means your subscription
                will be held for approval.  You will be notified of the list
                moderator's decision by email.
target: This is a closed list, which means your subscription
                will be held for approval.  You will be notified of the list
                moderator's decision by e-mail.

en: This is the default natural language for this mailing list.
                 If <a href="?VARHELP=language/available_languages">more than one
                 language</a> is supported then users will be able to select their
                 own preferences for when they interact with the list.  All other
                 interactions will be conducted in the default language.  This
                 applies to both web-based and email-based messages, but not to
                 email posted by list members.
target: This is the default natural language for this mailing list.
                 If <a href="?VARHELP=language/available_languages">more than one
                 language</a> is supported then users will be able to select their
                 own preferences for when they interact with the list.  All other
                 interactions will be conducted in the default language.  This
                 applies to both Web-based and e-mail-based messages, but not to
                 e-mail posted by list members.

en: This page allows you as the list owner, to permanent
        remove this mailing list from the system.  <strong>This action is not
        undoable</strong> so you should undertake it only if you are absolutely
        sure this mailing list has served its purpose and is no longer necessary.
    
        <p>Note that no warning will be sent to your list members and after this
        action, any subsequent messages sent to the mailing list, or any of its
        administrative addreses will bounce.
    
        <p>You also have the option of removing the archives for this mailing list
        at this time.  It is almost always recommended that you do
        <strong>not</strong> remove the archives, since they serve as the
        historical record of your mailing list.
    
        <p>For your safety, you will be asked to reconfirm the list password.
target: This page allows you as the list owner, to permanently
        remove this mailing list from the system.  <strong>This action is not
        undoable</strong> so you should undertake it only if you are absolutely
        sure this mailing list has served its purpose and is no longer necessary.
    
        <p>Note that no warning will be sent to your list members and after this
        action, any subsequent messages sent to the mailing list, or any of its
        administrative addreses will bounce.
    
        <p>You also have the option of removing the archives for this mailing list
        at this time.  It is almost always recommended that you do
        <strong>not</strong> remove the archives, since they serve as the
        historical record of your mailing list.
    
        <p>For your safety, you will be asked to reconfirm the list password.

en: This text will be prepended to subject lines of messages
                 posted to the list, to distinguish mailing list messages in
                 mailbox summaries.  Brevity is premium here, it's ok to shorten
                 long mailing list names to something more concise, as long as it
                 still identifies the mailing list.
                 You can also add a sequential number by %%d substitution
                 directive. eg.; [listname %%d] -> [listname 123]
                                (listname %%05d) -> (listname 00123)
target: This text will be prefixed to subject lines of messages
                 posted to the list, to distinguish mailing list messages in
                 mailbox summaries.  Brevity is premium here, it's ok to shorten
                 long mailing list names to something more concise, as long as it
                 still identifies the mailing list.
                 You can also add a sequential number by %%d substitution
                 directive. eg.; [listname %%d] -> [listname 123]
                                (listname %%05d) -> (listname 00123)

en: This value may be either the name of your news server, or
                 optionally of the format name:port, where port is a port number.
    
                 The news server is not part of Mailman proper.  You have to
                 already have access to an NNTP server, and that NNTP server must
                 recognize the machine this mailing list runs on as a machine
                 capable of reading and posting news.
target: This value may be either the name of your news server, or
                 optionally of the format name:port, where port is a port number.
    
                 The news server is not part of Mailman proper.  You have to
                 already have access to an NNTP server, and that NNTP server must
                 recognise the machine this mailing list runs on as a machine
                 capable of reading and posting news.

en: To unsubscribe from %(realname)s, get a password reminder,
            or change your subscription options %(either)senter your subscription
            email address:
            <p><center>
target: To unsubscribe from %(realname)s, get a password reminder,
            or change your subscription options %(either)senter your subscription
            e-mail address:
            <p><center>

en: Welcome email text file
target: Welcome e-mail text file

en: When <a href="?VARHELP=nondigest/personalize">personalization</a> is enabled
    for this list, additional substitution variables are allowed in your headers
    and footers:
    
    <ul><li><b>user_address</b> - The address of the user,
            coerced to lower case.
        <li><b>user_delivered_to</b> - The case-preserved address
            that the user is subscribed with.
        <li><b>user_password</b> - The user's password.
        <li><b>user_name</b> - The user's full name.
        <li><b>user_optionsurl</b> - The url to the user's option
            page.
    </ul>
target: When <a href="?VARHELP=nondigest/personalize">personalisation</a> is enabled
    for this list, additional substitution variables are allowed in your headers
    and footers:
    
    <ul><li><b>user_address</b> - The address of the user,
            coerced to lower case.
        <li><b>user_delivered_to</b> - The case-preserved address
            that the user is subscribed with.
        <li><b>user_password</b> - The user's password.
        <li><b>user_name</b> - The user's full name.
        <li><b>user_optionsurl</b> - The url to the user's option
            page.
    </ul>

en: When a message is posted to the list, a series of
                moderation steps are taken to decide whether a moderator must
                first approve the message or not.  This section contains the
                controls for moderation of both member and non-member postings.
    
                <p>Member postings are held for moderation if their
                <b>moderation flag</b> is turned on.  You can control whether
                member postings are moderated by default or not.
    
                <p>Non-member postings can be automatically
                <a href="?VARHELP=privacy/sender/accept_these_nonmembers"
                >accepted</a>,
                <a href="?VARHELP=privacy/sender/hold_these_nonmembers">held for
                moderation</a>,
                <a href="?VARHELP=privacy/sender/reject_these_nonmembers"
                >rejected</a> (bounced), or
                <a href="?VARHELP=privacy/sender/discard_these_nonmembers"
                >discarded</a>,
                either individually or as a group.  Any
                posting from a non-member who is not explicitly accepted,
                rejected, or discarded, will have their posting filtered by the
                <a href="?VARHELP=privacy/sender/generic_nonmember_action">general
                non-member rules</a>.
    
                <p>In the text boxes below, add one address per line; start the
                line with a ^ character to designate a <a href=
                "http://docs.python.org/library/re.html"
                >Python regular expression</a>.  When entering backslashes, do so
                as if you were using Python raw strings (i.e. you generally just
                use a single backslash).
    
                <p>Note that non-regexp matches are always done first.
target: When a message is posted to the list, a series of
                moderation steps are taken to decide whether a moderator must
                first approve the message or not.  This section contains the
                controls for moderation of both member and non-member postings.
    
                <p>Member postings are held for moderation if their
                <b>moderation flag</b> is turned on.  You can control whether
                member postings are moderated by default or not.
    
                <p>Non-member postings can be automatically
                <a href="?VARHELP=privacy/sender/accept_these_nonmembers"
                >accepted</a>,
                <a href="?VARHELP=privacy/sender/hold_these_nonmembers">held for
                moderation</a>,
                <a href="?VARHELP=privacy/sender/reject_these_nonmembers"
                >rejected</a> (bounced), or
                <a href="?VARHELP=privacy/sender/discard_these_nonmembers"
                >discarded</a>,
                either individually or as a group.  Any
                posting from a non-member who is not explicitly accepted,
                rejected, or discarded, will have their posting filtered by the
                <a href="?VARHELP=privacy/sender/generic_nonmember_action">general
                non-member rules</a>.
    
                <p>In the text boxes below, add one address per line; start the
                line with a ^ character to designate a <a href=
                "http://docs.python.org/library/re.html"
                >Python regular expression</a>.  When entering backslashes, do so
                as if you were using Python raw strings (i.e. you generally just
                use a single backslash).
    
                <p>Note that non-regex matches are always done first.

en: When a new member is subscribed to this list, their initial
                 set of options is taken from the this variable's setting.
target: When a new member is subscribed to this list, their initial
                 set of options is taken from this variable's setting.

en: When members want to leave a list, they will make an
                 unsubscription request, either via the web or via email.
                 Normally it is best for you to allow open unsubscriptions so that
                 users can easily remove themselves from mailing lists (they get
                 really upset if they can't get off lists!).
    
                 <p>For some lists though, you may want to impose moderator
                 approval before an unsubscription request is processed.  Examples
                 of such lists include a corporate mailing list that all employees
                 are required to be members of.
target: When members want to leave a list, they will make an
                 unsubscription request, either via the Web or via e-mail.
                 Normally it is best for you to allow open unsubscriptions so that
                 users can easily remove themselves from mailing lists (they get
                 really upset if they can't get off lists!).
    
                 <p>For some lists though, you may want to impose moderator
                 approval before an unsubscription request is processed.  Examples
                 of such lists include a corporate mailing list that all employees
                 are required to be members of.

en: When you scrub attachments, they are stored in archive
                 area and links are made in the message so that the member can
                 access via web browser. If you want the attachments totally
                 disappear, you can use content filter options.
target: When you scrub attachments, they are stored in the archive
                 area and links are made in the message so that the member can
                 access via a Web browser. If you want the attachments to totally
                 disappear, you can use content filter options.

en: While Mailman's bounce detector is fairly robust, it's
                 impossible to detect every bounce format in the world.  You
                 should keep this variable set to <em>Yes</em> for two reasons: 1)
                 If this really is a permanent bounce from one of your members,
                 you should probably manually remove them from your list, and 2)
                 you might want to send the message on to the Mailman developers
                 so that this new format can be added to its known set.
    
                 <p>If you really can't be bothered, then set this variable to
                 <em>No</em> and all non-detected bounces will be discarded
                 without further processing.
    
                 <p><b>Note:</b> This setting will also affect all messages sent
                 to your list's -admin address.  This address is deprecated and
                 should never be used, but some people may still send mail to this
                 address.  If this happens, and this variable is set to
                 <em>No</em> those messages too will get discarded.  You may want
                 to set up an
                 <a href="?VARHELP=autoreply/autoresponse_admin_text">autoresponse
                 message</a> for email to the -owner and -admin address.
target: While Mailman's bounce detector is fairly robust, it's
                 impossible to detect every bounce format in the world.  You
                 should keep this variable set to <em>Yes</em> for two reasons: 1)
                 If this really is a permanent bounce from one of your members,
                 you should probably manually remove them from your list, and 2)
                 you might want to send the message on to the Mailman developers
                 so that this new format can be added to its known set.
    
                 <p>If you really can't be bothered, then set this variable to
                 <em>No</em> and all non-detected bounces will be discarded
                 without further processing.
    
                 <p><b>Note:</b> This setting will also affect all messages sent
                 to your list's -admin address.  This address is deprecated and
                 should never be used, but some people may still send mail to this
                 address.  If this happens, and this variable is set to
                 <em>No</em> those messages too will get discarded.  You may want
                 to set up an
                 <a href="?VARHELP=autoreply/autoresponse_admin_text">autoresponse
                 message</a> for e-mail to the -owner and -admin address.

en: You are already using that email address
target: You are already using that e-mail address

en: You are not authorized to create new mailing lists
target: You are not authorised to create new mailing lists

en: You are not authorized to delete this mailing list
target: You are not authorised to delete this mailing list

en: You are not currently a member.  Have you already unsubscribed or changed
    your email address?
target: You are not currently a member.  Have you already unsubscribed or changed
    your e-mail address?

en: You can access your personal options via the following url:
target: You can access your personal options via the following URL:

en: You can create a new mailing list by entering the
        relevant information into the form below.  The name of the mailing list
        will be used as the primary address for posting messages to the list, so
        it should be lowercased.  You will not be able to change this once the
        list is created.
    
        <p>You also need to enter the email address of the initial list owner.
        Once the list is created, the list owner will be given notification, along
        with the initial list password.  The list owner will then be able to
        modify the password and add or remove additional list owners.
    
        <p>If you want Mailman to automatically generate the initial list admin
        password, click on `Yes' in the autogenerate field below, and leave the
        initial list password fields empty.
    
        <p>You must have the proper authorization to create new mailing lists.
        Each site should have a <em>list creator's</em> password, which you can
        enter in the field at the bottom.  Note that the site administrator's
        password can also be used for authentication.
target: You can create a new mailing list by entering the
        relevant information into the form below.  The name of the mailing list
        will be used as the primary address for posting messages to the list, so
        it should be lowercased.  You will not be able to change this once the
        list is created.
    
        <p>You also need to enter the e-mail address of the initial list owner.
        Once the list is created, the list owner will be given notification, along
        with the initial list password.  The list owner will then be able to
        modify the password and add or remove additional list owners.
    
        <p>If you want Mailman to automatically generate the initial list admin
        password, click on `Yes' in the autogenerate field below, and leave the
        initial list password fields empty.
    
        <p>You must have the proper authorisation to create new mailing lists.
        Each site should have a <em>list creator's</em> password, which you can
        enter in the field at the bottom.  Note that the site administrator's
        password can also be used for authentication.

en: You have canceled the re-enabling of your membership.  If
        we continue to receive bounces from your address, it could be deleted from
        this mailing list.
target: You have cancelled the re-enabling of your membership.  If
        we continue to receive bounces from your address, it could be deleted from
        this mailing list.

en: You have canceled your change of address request.
target: You have cancelled your change of address request.

en: You have canceled your subscription request.
target: You have cancelled your subscription request.

en: You have canceled your unsubscription request.
target: You have cancelled your unsubscription request.

en: You have regular list members but non-digestified mail is
                    turned off.  They will receive mail until you fix this
                    problem.
target: You have regular list members but non-digestified mail is
                    turned off.  They will not receive mail until you fix this
                    problem.

en: You must supply a valid email address.
target: You must supply a valid e-mail address.

en: You will be sent email requesting confirmation, to
                prevent others from gratuitously subscribing you.
target: You will be sent e-mail requesting confirmation, to
                prevent others from gratuitously subscribing you.

en: You will be sent email requesting confirmation, to
                prevent others from gratuitously subscribing you.  Once
                confirmation is received, your request will be held for approval
                by the list moderator.  You will be notified of the moderator's
                decision by email.
target: You will be sent e-mail requesting confirmation, to
                prevent others from gratuitously subscribing you.  Once
                confirmation is received, your request will be held for approval
                by the list moderator.  You will be notified of the moderator's
                decision by e-mail.

en: Your confirmation is required in order to complete the
        change of address request for the mailing list <em>%(listname)s</em>.  You
        are currently subscribed with
    
        <ul><li><b>Real name:</b> %(fullname)s
            <li><b>Old email address:</b> %(oldaddr)s
        </ul>
    
        and you have requested to %(globallys)s change your email address to
    
        <ul><li><b>New email address:</b> %(newaddr)s
        </ul>
    
        Hit the <em>Change address</em> button below to complete the confirmation
        process.
    
        <p>Or hit <em>Cancel and discard</em> to cancel this change of address
        request.
target: Your confirmation is required in order to complete the
        change of address request for the mailing list <em>%(listname)s</em>.  You
        are currently subscribed with
    
        <ul><li><b>Real name:</b> %(fullname)s
            <li><b>Old e-mail address:</b> %(oldaddr)s
        </ul>
    
        and you have requested to %(globallys)s change your e-mail address to
    
        <ul><li><b>New e-mail address:</b> %(newaddr)s
        </ul>
    
        Hit the <em>Change address</em> button below to complete the confirmation
        process.
    
        <p>Or hit <em>Cancel and discard</em> to cancel this change of address
        request.

en: Your confirmation is required in order to complete the
        subscription request to the mailing list <em>%(listname)s</em>.  Your
        subscription settings are shown below; make any necessary changes and hit
        <em>Subscribe</em> to complete the confirmation process.  Once you've
        confirmed your subscription request, you will be shown your account
        options page which you can use to further customize your membership
        options.
    
        <p>Note: your password will be emailed to you once your subscription is
        confirmed.  You can change it by visiting your personal options page.
    
        <p>Or hit <em>Cancel my subscription request</em> if you no longer want to
        subscribe to this list.
target: Your confirmation is required in order to complete the
        subscription request to the mailing list <em>%(listname)s</em>.  Your
        subscription settings are shown below; make any necessary changes and hit
        <em>Subscribe</em> to complete the confirmation process.  Once you've
        confirmed your subscription request, you will be shown your account
        options page which you can use to further customise your membership
        options.
    
        <p>Note: your password will be e-mailed to you once your subscription is
        confirmed.  You can change it by visiting your personal options page.
    
        <p>Or hit <em>Cancel my subscription request</em> if you no longer want to
        subscribe to this list.

en: Your confirmation is required in order to complete the
        unsubscription request from the mailing list <em>%(listname)s</em>.  You
        are currently subscribed with
    
        <ul><li><b>Real name:</b> %(fullname)s
            <li><b>Email address:</b> %(addr)s
        </ul>
    
        Hit the <em>Unsubscribe</em> button below to complete the confirmation
        process.
    
        <p>Or hit <em>Cancel and discard</em> to cancel this unsubscription
        request.
target: Your confirmation is required in order to complete the
        unsubscription request from the mailing list <em>%(listname)s</em>.  You
        are currently subscribed with
    
        <ul><li><b>Real name:</b> %(fullname)s
            <li><b>E-mail address:</b> %(addr)s
        </ul>
    
        Hit the <em>Unsubscribe</em> button below to complete the confirmation
        process.
    
        <p>Or hit <em>Cancel and discard</em> to cancel this unsubscription
        request.

en: Your confirmation is required in order to continue with
            the subscription request to the mailing list <em>%(listname)s</em>.
            Your subscription settings are shown below; make any necessary changes
            and hit <em>Subscribe to list ...</em> to complete the confirmation
            process.  Once you've confirmed your subscription request, the
            moderator must approve or reject your membership request.  You will
            receive notice of their decision.
    
            <p>Note: your password will be emailed to you once your subscription
            is confirmed.  You can change it by visiting your personal options
            page.
    
            <p>Or, if you've changed your mind and do not want to subscribe to
            this mailing list, you can hit <em>Cancel my subscription
            request</em>.
target: Your confirmation is required in order to continue with
            the subscription request to the mailing list <em>%(listname)s</em>.
            Your subscription settings are shown below; make any necessary changes
            and hit <em>Subscribe to list ...</em> to complete the confirmation
            process.  Once you've confirmed your subscription request, the
            moderator must approve or reject your membership request.  You will
            receive notice of their decision.
    
            <p>Note: your password will be e-mailed to you once your subscription
            is confirmed.  You can change it by visiting your personal options
            page.
    
            <p>Or, if you've changed your mind and do not want to subscribe to
            this mailing list, you can hit <em>Cancel my subscription
            request</em>.

en: Your email address:
target: Your e-mail address:

en: Your subscription is not allowed because
    the email address you gave is insecure.
target: Your subscription is not allowed because
    the e-mail address you gave is insecure.

en: Your subscription is not allowed because the email address you gave is
    insecure.
target: Your subscription is not allowed because the e-mail address you gave is
    insecure.

en: Your subscription request has been received, and will soon be acted upon.
    Depending on the configuration of this mailing list, your subscription request
    may have to be first confirmed by you via email, or approved by the list
    moderator.  If confirmation is required, you will soon get a confirmation
    email which contains further instructions.
target: Your subscription request has been received, and will soon be acted upon.
    Depending on the configuration of this mailing list, your subscription request
    may have to be first confirmed by you via e-mail, or approved by the list
    moderator.  If confirmation is required, you will soon get a confirmation
    e-mail which contains further instructions.

en: Your subscription request was deferred because %(x)s.  Your request has been
    forwarded to the list moderator.  You will receive email informing you of the
    moderator's decision when they get to your request.
target: Your subscription request was deferred because %(x)s.  Your request has been
    forwarded to the list moderator.  You will receive e-mail informing you of the
    moderator's decision when they get to your request.

en: Your urgent message to the %(realname)s mailing list was not authorized for
    delivery.  The original message as received by Mailman is attached.
target: Your urgent message to the %(realname)s mailing list was not authorised for
    delivery.  The original message as received by Mailman is attached.

en: email address and
target: e-mail address and

en: fixing all the perms on your old html archives to work with b6
    If your archives are big, this could take a minute or two...
target: fixing all the perms on your old HTML archives to work with b6
    If your archives are big, this could take a minute or two...
