bacula - en to unknown language translation catalogue (275 entries)

en: 
    The following files are in the Catalog but not on %s:
target: 
    The following files are in the Catalogue but not on %s:

en: 
    This command will delete volume %s
    and all Jobs saved on that volume from the Catalog
target: 
    This command will delete volume %s
    and all Jobs saved on that volume from the Catalogue

en: 
    Usage: testfind [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -d <nn>     set debug level to <nn>
           -dt         print timestamp in debug output
           -c          specify config file containing FileSet resources
           -f          specify which FileSet to use
           -?          print this message.
    
    Patterns are used for file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalog.
    Errors are always printed.
    Files/paths truncated is the number of files/paths with len > 255.
    Truncation is only in the catalog.
target: 
    Usage: testfind [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -d <nn>     set debug level to <nn>
           -dt         print timestamp in debug output
           -c          specify config file containing FileSet resources
           -f          specify which FileSet to use
           -?          print this message.
    
    Patterns are used for file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalogue.
    Errors are always printed.
    Files/paths truncated is the number of files/paths with len > 255.
    Truncation is only in the catalogue.

en: 
    Usage: testfind [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -dnn        set debug level to nn
           -c          specify config file containing FileSet resources
           -f          specify which FileSet to use
           -?          print this message.
    
    Patterns are used for file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalog.
    Errors are always printed.
    Files/paths truncated is the number of files/paths with len > 255.
    Truncation is only in the catalog.
target: 
    Usage: testfind [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -dnn        set debug level to nn
           -c          specify config file containing FileSet resources
           -f          specify which FileSet to use
           -?          print this message.
    
    Patterns are used for file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalogue.
    Errors are always printed.
    Files/paths truncated is the number of files/paths with len > 255.
    Truncation is only in the catalogue.

en: 
    Usage: testfind [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -dnn        set debug level to nn
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalog.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalog.
target: 
    Usage: testfind [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -dnn        set debug level to nn
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalogue.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalogue.

en: 
    Usage: testls [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -d <nn>     set debug level to <nn>
           -dt         print timestamp in debug output
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalog.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalog.
target: 
    Usage: testls [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -d <nn>     set debug level to <nn>
           -dt         print timestamp in debug output
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalogue.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalogue.

en: 
    Usage: testls [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -d <nn>     set debug level to <nn>
           -dt         print timestamp in debug output
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -q          quiet, don't print filenames (debug)
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalog.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalog.
target: 
    Usage: testls [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -d <nn>     set debug level to <nn>
           -dt         print timestamp in debug output
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -q          quiet, don't print filenames (debug)
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalogue.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalogue.

en: 
    Usage: testls [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -dnn        set debug level to nn
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalog.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalog.
target: 
    Usage: testls [-d debug_level] [-] [pattern1 ...]
           -a          print extended attributes (Win32 debug)
           -dnn        set debug level to nn
           -e          specify file of exclude patterns
           -i          specify file of include patterns
           -           read pattern(s) from stdin
           -?          print this message.
    
    Patterns are file inclusion -- normally directories.
    Debug level >= 1 prints each file found.
    Debug level >= 10 prints path/file for catalogue.
    Errors always printed.
    Files/paths truncated is number with len > 255.
    Truncation is only in catalogue.

en: 
    Version: %s (%s)
    
    Usage: bscan [ options ] <bacula-archive>
           -b bootstrap      specify a bootstrap file
           -c <file>         specify configuration file
           -d <nn>           set debug level to <nn>
           -dt               print timestamp in debug output
           -m                update media info in database
           -D <driver name>  specify the driver database name (default NULL)
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password>     specify database password (default none)
           -h <host>         specify database host (default NULL)
           -t <port>         specify database port (default 0)
           -p                proceed inspite of I/O errors
           -r                list records
           -s                synchronize or store in database
           -S                show scan progress periodically
           -v                verbose
           -V <Volumes>      specify Volume names (separated by |)
           -w <dir>          specify working directory (default from conf file)
           -?                print this message
target: 
    Version: %s (%s)
    
    Usage: bscan [ options ] <bacula-archive>
           -b bootstrap      specify a bootstrap file
           -c <file>         specify configuration file
           -d <nn>           set debug level to <nn>
           -dt               print timestamp in debug output
           -m                update media info in database
           -D <driver name>  specify the driver database name (default NULL)
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password>     specify database password (default none)
           -h <host>         specify database host (default NULL)
           -t <port>         specify database port (default 0)
           -p                proceed inspite of I/O errors
           -r                list records
           -s                synchronise or store in database
           -S                show scan progress periodically
           -v                verbose
           -V <Volumes>      specify Volume names (separated by |)
           -w <dir>          specify working directory (default from conf file)
           -?                print this message

en: 
    Version: %s (%s)
    
    Usage: bscan [ options ] <bacula-archive>
           -b bootstrap      specify a bootstrap file
           -c <file>         specify configuration file
           -d <nn>           set debug level to <nn>
           -m                update media info in database
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password>     specify database password (default none)
           -h <host>         specify database host (default NULL)
           -p                proceed inspite of I/O errors
           -r                list records
           -s                synchronize or store in database
           -S                show scan progress periodically
           -v                verbose
           -V <Volumes>      specify Volume names (separated by |)
           -w <dir>          specify working directory (default from conf file)
           -?                print this message
target: 
    Version: %s (%s)
    
    Usage: bscan [ options ] <bacula-archive>
           -b bootstrap      specify a bootstrap file
           -c <file>         specify configuration file
           -d <nn>           set debug level to <nn>
           -m                update media info in database
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password>     specify database password (default none)
           -h <host>         specify database host (default NULL)
           -p                proceed inspite of I/O errors
           -r                list records
           -s                synchronise or store in database
           -S                show scan progress periodically
           -v                verbose
           -V <Volumes>      specify Volume names (separated by |)
           -w <dir>          specify working directory (default from conf file)
           -?                print this message

en: 
    Version: %s (%s)
    Example : bbatch -w /path/to/workdir -h localhost -f dat1 -f dat -f datx
     will start 3 thread and load dat1, dat and datx in your catalog
    See bbatch.c to generate datafile
    
    Usage: bbatch [ options ] -w working/dir -f datafile
           -d <nn>           set debug level to <nn>
           -dt               print timestamp in debug output
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password      specify database password (default none)
           -h <host>         specify database host (default NULL)
           -w <working>      specify working directory
           -v                verbose
           -f <file>         specify data file
           -?                print this message
target: 
    Version: %s (%s)
    Example : bbatch -w /path/to/workdir -h localhost -f dat1 -f dat -f datx
     will start 3 thread and load dat1, dat and datx in your catalogue
    See bbatch.c to generate datafile
    
    Usage: bbatch [ options ] -w working/dir -f datafile
           -d <nn>           set debug level to <nn>
           -dt               print timestamp in debug output
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password      specify database password (default none)
           -h <host>         specify database host (default NULL)
           -w <working>      specify working directory
           -v                verbose
           -f <file>         specify data file
           -?                print this message

en: 
    Version: %s (%s)
    Example : bbatch -w /path/to/workdir -h localhost -f dat1 -f dat -f datx
     will start 3 thread and load dat1, dat and datx in your catalog
    See bbatch.c to generate datafile
    
    Usage: bbatch [ options ] -w working/dir -f datafile
           -d <nn>           set debug level to nn
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password      specify database password (default none)
           -h <host>         specify database host (default NULL)
           -w <working>      specify working directory
           -v                verbose
           -f <file>         specify data file
           -?                print this message
target: 
    Version: %s (%s)
    Example : bbatch -w /path/to/workdir -h localhost -f dat1 -f dat -f datx
     will start 3 thread and load dat1, dat and datx in your catalogue
    See bbatch.c to generate datafile
    
    Usage: bbatch [ options ] -w working/dir -f datafile
           -d <nn>           set debug level to nn
           -n <name>         specify the database name (default bacula)
           -u <user>         specify database user name (default bacula)
           -P <password      specify database password (default none)
           -h <host>         specify database host (default NULL)
           -w <working>      specify working directory
           -v                verbose
           -f <file>         specify data file
           -?                print this message

en:       Catalog=%s
target:       Catalogue=%s

en:     Device is being initialized.
target:     Device is being initialised.

en:     Device is blocked labeling a Volume.
target:     Device is blocked labelling a Volume.

en:  Initializing ...
target:  Initialising ...

en: "RegexWhere" specification not authorized.
target: "RegexWhere" specification not authorised.

en: "where" specification not authorized.
target: "where" specification not authorised.

en: %d File%s on Volume "%s" purged from catalog.
target: %d File%s on Volume "%s" purged from catalogue.

en: %d Jobs for client %s purged from %s catalog.
target: %d Jobs for client %s purged from %s catalogue.

en: %s %s %s (%s): %s
      Build OS:               %s %s %s
      JobId:                  %d
      Job:                    %s
      Backup Level:           %s%s
      Client:                 "%s" %s
      FileSet:                "%s" %s
      Pool:                   "%s" (From %s)
      Catalog:                "%s" (From %s)
      Storage:                "%s" (From %s)
      Scheduled time:         %s
      Start time:             %s
      End time:               %s
      Elapsed time:           %s
      Priority:               %d
      FD Files Written:       %s
      SD Files Written:       %s
      FD Bytes Written:       %s (%sB)
      SD Bytes Written:       %s (%sB)
      Rate:                   %.1f KB/s
      Software Compression:   %s
      VSS:                    %s
      Encryption:             %s
      Accurate:               %s
      Volume name(s):         %s
      Volume Session Id:      %d
      Volume Session Time:    %d
      Last Volume Bytes:      %s (%sB)
      Non-fatal FD errors:    %d
      SD Errors:              %d
      FD termination status:  %s
      SD termination status:  %s
      Termination:            %s
target: %s %s %s (%s): %s
      Build OS:               %s %s %s
      JobId:                  %d
      Job:                    %s
      Backup Level:           %s%s
      Client:                 "%s" %s
      FileSet:                "%s" %s
      Pool:                   "%s" (From %s)
      Catalogue:                "%s" (From %s)
      Storage:                "%s" (From %s)
      Scheduled time:         %s
      Start time:             %s
      End time:               %s
      Elapsed time:           %s
      Priority:               %d
      FD Files Written:       %s
      SD Files Written:       %s
      FD Bytes Written:       %s (%sB)
      SD Bytes Written:       %s (%sB)
      Rate:                   %.1f KB/s
      Software Compression:   %s
      VSS:                    %s
      Encryption:             %s
      Accurate:               %s
      Volume name(s):         %s
      Volume Session Id:      %d
      Volume Session Time:    %d
      Last Volume Bytes:      %s (%sB)
      Non-fatal FD errors:    %d
      SD Errors:              %d
      FD termination status:  %s
      SD termination status:  %s
      Termination:            %s

en: %s %s %s (%s): %s
      Build OS:               %s %s %s
      JobId:                  %d
      Job:                    %s
      Backup Level:           Virtual Full
      Client:                 "%s" %s
      FileSet:                "%s" %s
      Pool:                   "%s" (From %s)
      Catalog:                "%s" (From %s)
      Storage:                "%s" (From %s)
      Scheduled time:         %s
      Start time:             %s
      End time:               %s
      Elapsed time:           %s
      Priority:               %d
      SD Files Written:       %s
      SD Bytes Written:       %s (%sB)
      Rate:                   %.1f KB/s
      Volume name(s):         %s
      Volume Session Id:      %d
      Volume Session Time:    %d
      Last Volume Bytes:      %s (%sB)
      SD Errors:              %d
      SD termination status:  %s
      Termination:            %s
target: %s %s %s (%s): %s
      Build OS:               %s %s %s
      JobId:                  %d
      Job:                    %s
      Backup Level:           Virtual Full
      Client:                 "%s" %s
      FileSet:                "%s" %s
      Pool:                   "%s" (From %s)
      Catalogue:                "%s" (From %s)
      Storage:                "%s" (From %s)
      Scheduled time:         %s
      Start time:             %s
      End time:               %s
      Elapsed time:           %s
      Priority:               %d
      SD Files Written:       %s
      SD Bytes Written:       %s (%sB)
      Rate:                   %.1f KB/s
      Volume name(s):         %s
      Volume Session Id:      %d
      Volume Session Time:    %d
      Last Volume Bytes:      %s (%sB)
      SD Errors:              %d
      SD termination status:  %s
      Termination:            %s

en: %s %s %s (%s): %s
      Build OS:               %s %s %s
      Prev Backup JobId:      %s
      Prev Backup Job:        %s
      New Backup JobId:       %s
      Current JobId:          %s
      Current Job:            %s
      Backup Level:           %s%s
      Client:                 %s
      FileSet:                "%s" %s
      Read Pool:              "%s" (From %s)
      Read Storage:           "%s" (From %s)
      Write Pool:             "%s" (From %s)
      Write Storage:          "%s" (From %s)
      Catalog:                "%s" (From %s)
      Start time:             %s
      End time:               %s
      Elapsed time:           %s
      Priority:               %d
      SD Files Written:       %s
      SD Bytes Written:       %s (%sB)
      Rate:                   %.1f KB/s
      Volume name(s):         %s
      Volume Session Id:      %d
      Volume Session Time:    %d
      Last Volume Bytes:      %s (%sB)
      SD Errors:              %d
      SD termination status:  %s
      Termination:            %s
target: %s %s %s (%s): %s
      Build OS:               %s %s %s
      Prev Backup JobId:      %s
      Prev Backup Job:        %s
      New Backup JobId:       %s
      Current JobId:          %s
      Current Job:            %s
      Backup Level:           %s%s
      Client:                 %s
      FileSet:                "%s" %s
      Read Pool:              "%s" (From %s)
      Read Storage:           "%s" (From %s)
      Write Pool:             "%s" (From %s)
      Write Storage:          "%s" (From %s)
      Catalogue:                "%s" (From %s)
      Start time:             %s
      End time:               %s
      Elapsed time:           %s
      Priority:               %d
      SD Files Written:       %s
      SD Bytes Written:       %s (%sB)
      Rate:                   %.1f KB/s
      Volume name(s):         %s
      Volume Session Id:      %d
      Volume Session Time:    %d
      Last Volume Bytes:      %s (%sB)
      SD Errors:              %d
      SD termination status:  %s
      Termination:            %s

en: %s Canceled
target: %s Cancelled

en: %s digest initialization failed
target: %s digest initialisation failed

en: %s signature digest initialization failed
target: %s signature digest initialisation failed

en: %s: Director authorization problem.
target: %s: Director authorisation problem.

en: 1990 Invalid Catalog Request: %s
target: 1990 Invalid Catalogue Request: %s

en: 1991 Catalog Request for vol=%s failed: %s
target: 1991 Catalogue Request for vol=%s failed: %s

en: 1994 Invalid Catalog Update: %s
target: 1994 Invalid Catalogue Update: %s

en: 1997 Volume "%s" not in catalog.
target: 1997 Volume "%s" not in catalogue.

en: 1999 Authorization failed.
target: 1999 Authorisation failed.

en: 2001 Job %s marked to be canceled.
target: 2001 Job %s marked to be cancelled.

en: 3000 Job %s marked to be canceled.
target: 3000 Job %s marked to be cancelled.

en: 3903 Device %s is being labeled.
target: 3903 Device %s is being labelled.

en: 3914 Device %s is being labeled.
target: 3914 Device %s is being labelled.

en: 3920 Cannot label Volume because it is already labeled: "%s"
target: 3920 Cannot label Volume because it is already labelled: "%s"

en: 3922 Cannot relabel an ANSI/IBM labeled Volume.
target: 3922 Cannot relabel an ANSI/IBM labelled Volume.

en: 3934 Device %s is being initialized.
target: 3934 Device %s is being initialised.

en: 3935 Device %s is blocked labeling a Volume.
target: 3935 Device %s is blocked labelling a Volume.

en: Access to JobId=%s (Job "%s") not authorized. Not selected.
target: Access to JobId=%s (Job "%s") not authorised. Not selected.

en: Acquire read: num_writers=%d not zero. Job %d canceled.
target: Acquire read: num_writers=%d not zero. Job %d cancelled.

en: Admin Canceled
target: Admin Cancelled

en: An error occurred finalizing signing the stream.
target: An error occurred finalising signing the stream.

en: Attempt to put non-attributes into catalog. Stream=%d
target: Attempt to put non-attributes into catalogue. Stream=%d

en: Authorization key rejected by Storage daemon.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.
target: Authorisation key rejected by Storage daemon.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.

en: Authorization key rejected by Storage daemon.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.
target: Authorisation key rejected by Storage daemon.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.

en: Authorization problem with Director at "%s:%d"
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/5.0.x-manuals/Auth-Error for help.
target: Authorisation problem with Director at "%s:%d"
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/5.0.x-manuals/Auth-Error for help.

en: Authorization problem with Director at "%s:%d"
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.
target: Authorisation problem with Director at "%s:%d"
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.

en: Authorization problem with Director at "%s:%d"
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.
target: Authorisation problem with Director at "%s:%d"
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.

en: Authorization problem with Director at "%s:%d": Remote server requires TLS.
target: Authorisation problem with Director at "%s:%d": Remote server requires TLS.

en: Authorization problem: FD "%s:%s" did not advertise required TLS support.
target: Authorisation problem: FD "%s:%s" did not advertise required TLS support.

en: Authorization problem: FD at "%s:%d" requires TLS.
target: Authorisation problem: FD at "%s:%d" requires TLS.

en: Authorization problem: Remote client did not advertise required TLS support.
target: Authorisation problem: Remote client did not advertise required TLS support.

en: Authorization problem: Remote client requires TLS.
target: Authorisation problem: Remote client requires TLS.

en: Authorization problem: Remote server at "%s:%d" did not advertise required TLS support.
target: Authorisation problem: Remote server at "%s:%d" did not advertise required TLS support.

en: Authorization problem: Remote server did not advertise required TLS support.
target: Authorisation problem: Remote server did not advertise required TLS support.

en: Authorization problem: Remote server did not advertize required TLS support.
target: Authorisation problem: Remote server did not advertise required TLS support.

en: Authorization problem: Remote server requires TLS.
target: Authorisation problem: Remote server requires TLS.

en: Autochanger Volume "%s" not found in slot %d.
        Setting InChanger to zero in catalog.
target: Autochanger Volume "%s" not found in slot %d.
        Setting InChanger to zero in catalogue.

en: Autodisplay console messages
target: Auto-display console messages

en: Automount after label
target: Auto-mount after label

en: Backup Canceled
target: Backup Cancelled

en: Bacula Client: Last Job Canceled
target: Bacula Client: Last Job Cancelled

en: Bacula Storage: Last Job Canceled
target: Bacula Storage: Last Job Cancelled

en: Bacula cannot write on DVD Volume "%s" because: The sizes do not match! Volume=%s Catalog=%s
target: Bacula cannot write on DVD Volume "%s" because: The sizes do not match! Volume=%s Catalogue=%s

en: Bacula cannot write on disk Volume "%s" because: The sizes do not match! Volume=%s Catalog=%s
target: Bacula cannot write on disk Volume "%s" because: The sizes do not match! Volume=%s Catalogue=%s

en: Bacula cannot write on tape Volume "%s" because:
    The number of files mismatch! Volume=%u Catalog=%u
target: Bacula cannot write on tape Volume "%s" because:
    The number of files mismatch! Volume=%u Catalogue=%u

en: Can't update volume size in the catalog
target: Can't update volume size in the catalogue

en: Canceled
target: Cancelled

en: Canceled by user
target: Cancelled by user

en: Catalog
target: Catalogue

en: Catalog "%s" not found
target: Catalogue "%s" not found

en: Catalog error creating JobMedia record. %s
target: Catalogue error creating JobMedia record. %s

en: Catalog error on cleaning tape: %s
target: Catalogue error on cleaning tape: %s

en: Catalog error updating Media record. %s
target: Catalogue error updating Media record. %s

en: Catalog error updating file digest. %s
target: Catalogue error updating file digest. %s

en: Catalog error updating file digest. Unsupported digest stream type: %d
target: Catalogue error updating file digest. Unsupported digest stream type: %d

en: Catalog error updating volume "%s". ERR=%s
target: Catalogue error updating volume "%s". ERR=%s

en: Catalog record for Volume "%s" is up to date.
target: Catalogue record for Volume "%s" is up to date.

en: Catalog record for Volume "%s" updated to reference slot %d.
target: Catalogue record for Volume "%s" updated to reference slot %d.

en: Catalog record for Volume "%s", Slot %d  successfully created.
target: Catalogue record for Volume "%s", Slot %d  successfully created.

en: Catalog record for cleaning tape "%s" successfully created.
target: Catalogue record for cleaning tape "%s" successfully created.

en: Catalog: name=%s address=%s DBport=%d db_name=%s
          db_driver=%s db_user=%s MutliDBConn=%d
target: Catalogue: name=%s address=%s DBport=%d db_name=%s
          db_driver=%s db_user=%s MutliDBConn=%d

en: Catalog: name=%s address=%s DBport=%d db_name=%s
          db_user=%s MutliDBConn=%d
target: Catalogue: name=%s address=%s DBport=%d db_name=%s
          db_user=%s MutliDBConn=%d

en: Choose catalog item to delete
target: Choose catalogue item to delete

en: Choose catalog item to update
target: Choose catalogue item to update

en: Client record not found in Catalog.
target: Client record not found in Catalogue.

en: Command plugin "%s" returned bad startBackupFile packet.
target: Command plug-in "%s" returned bad startBackupFile packet.

en: Could not find a Catalog resource
target: Could not find a Catalogue resource

en: Could not initialize %s
target: Could not initialise %s

en: Could not initialize Python
target: Could not initialise Python

en: Could not initialize Python Job type.
target: Could not initialise Python Job type.

en: Could not open Catalog "%s", database "%s".
target: Could not open Catalogue "%s", database "%s".

en: Could not open catalog database "%s".
target: Could not open catalogue database "%s".

en: Could not unserialize Volume label: ERR=%s
target: Could not unserialise Volume label: ERR=%s

en: Counter record: %s not found in Catalog.
target: Counter record: %s not found in Catalogue.

en: Created new Volume "%s" in catalog.
target: Created new Volume "%s" in catalogue.

en: Cryptographic library initialization failed.
target: Cryptographic library initialisation failed.

en: Cryptography library initialization failed.
target: Cryptography library initialisation failed.

en: Current max files is: %u
target: Current max. files is: %u

en: Delete of Volume "%s" failed. ERR=%s
target: Deletion of Volume "%s" failed. ERR=%s

en: Device: name=%s ok=%d num_writers=%d max_writers=%d
          reserved=%d open=%d append=%d read=%d labeled=%d offline=%d autochgr=%d
          poolid=%s volname=%s MediaType=%s
target: Device: name=%s ok=%d num_writers=%d max_writers=%d
          reserved=%d open=%d append=%d read=%d labelled=%d offline=%d autochgr=%d
          poolid=%s volname=%s MediaType=%s

en: Director authorization problem at "%s:%d"
target: Director authorisation problem at "%s:%d"

en: Director authorization problem.
target: Director authorisation problem.

en: Director authorization problem.
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.
target: Director authorisation problem.
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.

en: Director authorization problem.
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.
target: Director authorisation problem.
    Most likely the passwords do not agree.
    If you are using TLS, there may have been a certificate validation error during the TLS handshake.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.

en: Director authorization problem.
    Most likely the passwords do not agree.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.
target: Director authorisation problem.
    Most likely the passwords do not agree.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.

en: Director authorization problem.
    Most likely the passwords do not agree.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.
target: Director authorisation problem.
    Most likely the passwords do not agree.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.

en: Disk to Catalog
target: Disk to Catalogue

en: Driver type not specified in Catalog resource.
target: Driver type not specified in Catalogue resource.

en: Error : Library not initialized
target: Error : Library not initialised

en: Error can not find the Catalog name[%s] in the given config file [%s]
target: Error cannot find the Catalogue name[%s] in the given config file [%s]

en: Error initializing SSL context
target: Error initialising SSL context

en: Error reading catalog DB control file. ERR=%s
target: Error reading catalogue DB control file. ERR=%s

en: Error there is no Catalog section in the given config file [%s]
target: Error there is no Catalogue section in the given config file [%s]

en: Error while initializing library.
target: Error while initialising library.

en: Error while initializing windows sockets...
target: Error while initialising windows sockets...

en: Error, catalog DB control file wrong version. Wanted %d, got %d
    Please reinitialize the working directory.
target: Error, catalogue DB control file wrong version. Wanted %d, got %d
    Please reinitialise the working directory.

en: Failed to find any plugins in %s
target: Failed to find any plug-ins in %s

en: Failed to initialize TLS context for Console "%s".
target: Failed to initialise TLS context for Console "%s".

en: Failed to initialize TLS context for Director "%s" in %s.
target: Failed to initialise TLS context for Director "%s" in %s.

en: Failed to initialize TLS context for Director "%s".
target: Failed to initialise TLS context for Director "%s".

en: Failed to initialize TLS context for File daemon "%s" in %s.
target: Failed to initialise TLS context for File daemon "%s" in %s.

en: Failed to initialize TLS context for Storage "%s" in %s.
target: Failed to initialise TLS context for Storage "%s" in %s.

en: Failed to initialize decryption context for %s
target: Failed to initialise decryption context for %s

en: Failed to initialize encryption context.
target: Failed to initialise encryption context.

en: Failed to open Plugin directory %s: ERR=%s
target: Failed to open Plug-in directory %s: ERR=%s

en: Failed to serialize extended attributes on file "%s"
target: Failed to serialise extended attributes on file "%s"

en: File not in catalog: %s
target: File not in catalogue: %s

en: File record not found in Catalog.
target: File record not found in Catalogue.

en: FileSet record not found in Catalog.
target: FileSet record not found in Catalogue.

en: Filename record: %s not found in Catalog.
target: Filename record: %s not found in Catalogue.

en: Files for %d Jobs for client "%s" purged from %s catalog.
target: Files for %d Jobs for client "%s" purged from %s catalogue.

en: Incorrect authorization key from File daemon at %s rejected.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.
target: Incorrect authorisation key from File daemon at %s rejected.
    Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help.

en: Incorrect authorization key from File daemon at %s rejected.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.
target: Incorrect authorisation key from File daemon at %s rejected.
    Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.

en: Init Catalog
target: Init Catalogue

en: Initialize Catalog
target: Initialise Catalogue

en: Initializing ...
target: Initialising ...

en: Invalid Catalog Update; DB not open: %s
target: Invalid Catalogue Update; DB not open: %s

en: Invalid Catalog request: %s
target: Invalid Catalogue request: %s

en: Invalid Catalog request; DB not open: %s
target: Invalid Catalogue request; DB not open: %s

en: Invalid slot=%d defined in catalog for Volume "%s" on %s. Manual load may be required.
target: Invalid slot=%d defined in catalogue for Volume "%s" on %s. Manual load may be required.

en: Job %d canceled.
target: Job %d cancelled.

en: Job %s and associated records deleted from the catalog.
target: Job %s and associated records deleted from the catalogue.

en: Job %s canceled while waiting for mount on Storage Device "%s".
target: Job %s cancelled while waiting for mount on Storage Device "%s".

en: Job %s canceled while waiting for mount on Storage Device %s.
target: Job %s cancelled while waiting for mount on Storage Device %s.

en: Job %s canceled.
target: Job %s cancelled.

en: Job %s marked to be canceled.
target: Job %s marked to be cancelled.

en: Job canceled because max sched run time exceeded.
target: Job cancelled because max sched run time exceeded.

en: Job canceled because max start delay time exceeded.
target: Job cancelled because max start delay time exceeded.

en: Job canceled.
target: Job cancelled.

en: Job canceled. Attempt to read and write same device.
        Read storage "%s" (From %s) -- Write storage "%s" (From %s)
target: Job cancelled. Attempt to read and write same device.
        Read storage "%s" (From %s) -- Write storage "%s" (From %s)

en: Job status: Canceled
target: Job status: Cancelled

en: JobId %s, Job %s marked to be canceled.
target: JobId %s, Job %s marked to be cancelled.

en: JobId=%d Job="%s" marked to be canceled.
target: JobId=%d Job="%s" marked to be cancelled.

en: Labeled new Volume "%s" on device %s.
target: Labelled new Volume "%s" on device %s.

en: List objects from catalog
target: List objects from catalogue

en: Loaded plugin: %s
target: Loaded plug-in: %s

en: Lookup of loadPlugin in plugin %s failed: ERR=%s
target: Lookup of loadPlugin in plug-in %s failed: ERR=%s

en: Lookup of unloadPlugin in plugin %s failed: ERR=%s
target: Lookup of unloadPlugin in plug-in %s failed: ERR=%s

en: Malformed plugin command. Name not terminated by colon: %s
target: Malformed plug-in command. Name not terminated by colon: %s

en: Marking Volume "%s" in Error in Catalog.
target: Marking Volume "%s" in Error in Catalogue.

en: Max run time exceeded. Job canceled.
target: Max run time exceeded. Job cancelled.

en: Max sched run time exceeded. Job canceled.
target: Max sched run time exceeded. Job cancelled.

en: Max wait time exceeded. Job canceled.
target: Max wait time exceeded. Job cancelled.

en: Media record for MediaId=%u not found in Catalog.
target: Media record for MediaId=%u not found in Catalogue.

en: Media record for Vol=%s not found in Catalog.
target: Media record for Vol=%s not found in Catalogue.

en: No Catalog resource defined for client %s
target: No Catalogue resource defined for client %s

en: No Files found for client %s to purge from %s catalog.
target: No Files found for client %s to purge from %s catalogue.

en: No Volume for JobId %d found in Catalog.
target: No Volume for JobId %d found in Catalogue.

en: No authorization for "regexwhere" specification.
target: No authorisation for "regexwhere" specification.

en: No authorization for Catalog "%s"
target: No authorisation for Catalogue "%s"

en: No authorization for Client "%s"
target: No authorisation for Client "%s"

en: No authorization for FileSet "%s"
target: No authorisation for FileSet "%s"

en: No authorization for Job "%s"
target: No authorisation for Job "%s"

en: No authorization. Catalog "%s".
target: No authorisation. Catalogue "%s".

en: No authorization. Client "%s".
target: No authorisation. Client "%s".

en: No authorization. FileSet "%s".
target: No authorisation. FileSet "%s".

en: No authorization. Job "%s".
target: No authorisation. Job "%s".

en: No authorization. Pool "%s".
target: No authorisation. Pool "%s".

en: No authorization. Storage "%s".
target: No authorisation. Storage "%s".

en: No authoriztion for "PluginOptions" specification.
target: No authorisation for "PluginOptions" specification.

en: No authoriztion for "where" specification.
target: No authorisation for "where" specification.

en: No prior or suitable Differential backup found in catalog. Doing Differential backup.
target: No prior or suitable Differential backup found in catalogue. Doing Differential backup.

en: No prior or suitable Full backup found in catalog. Doing FULL backup.
target: No prior or suitable Full backup found in catalogue. Doing FULL backup.

en: No volumes specified for reading. Job %s canceled.
target: No volumes specified for reading. Job %s cancelled.

en: Old volume "%s" deleted from catalog.
target: Old volume "%s" deleted from catalogue.

en: OpenSSL cipher context initialization failed
target: OpenSSL cipher context initialisation failed

en: OpenSSL cipher context key/IV initialization failed
target: OpenSSL cipher context key/IV initialisation failed

en: OpenSSL digest finalize failed
target: OpenSSL digest finalise failed

en: OpenSSL digest initialization failed
target: OpenSSL digest initialisation failed

en: Path record: %s not found in Catalog.
target: Path record: %s not found in Catalogue.

en: Please Plugin Options string:
target: Please Plug-in Options string:

en: Plugin Directory not defined. Cannot use plugin: "%"
target: Plug-in Directory not defined. Cannot use plug-in: "%"

en: Plugin Options
target: Plug-in Options

en: Plugin Options not yet implemented.
target: Plug-in Options not yet implemented.

en: Plugin Options specified twice.
target: Plug-in Options specified twice.

en: Plugin createFile call failed. Returned CF_ERROR file=%s
target: Plug-in createFile call failed. Returned CF_ERROR file=%s

en: Plugin createFile call failed. Stat=%d file=%s
target: Plug-in createFile call failed. Stat=%d file=%s

en: Plugin directive not permitted in Exclude
target: Plug-in directive not permitted in Exclude

en: Plugin license incompatible. Plugin=%s license=%s
target: Plug-in licence incompatible. Plugin=%s license=%s

en: Plugin load %s failed: ERR=%s
target: Plug-in load %s failed: ERR=%s

en: Plugin magic wrong. Plugin=%s wanted=%s got=%s
target: Plug-in magic wrong. Plugin=%s wanted=%s got=%s

en: Plugin save packet not found.
target: Plug-in save packet not found.

en: Plugin version incorrect. Plugin=%s wanted=%d got=%d
target: Plug-in version incorrect. Plugin=%s wanted=%d got=%d

en: Plugin: "%s" not found.
target: Plug-in: "%s" not found.

en: Plugin=%s not found.
target: Plug-in=%s not found.

en: Pool record not found in Catalog.
target: Pool record not found in Catalogue.

en: Prior failed job found in catalog. Upgrading to %s.
target: Prior failed job found in catalogue. Upgrading to %s.

en: Prune expired records from catalog
target: Prune expired records from catalogue

en: Pruned %d %s for client %s from catalog.
target: Pruned %d %s for client %s from catalogue.

en: Pruned Files from %s Jobs for client %s from catalog.
target: Pruned Files from %s Jobs for client %s from catalogue.

en: Pruned Jobs from JobHisto catalog.
target: Pruned Jobs from JobHisto catalogue.

en: Purge records from catalog
target: Purge records from catalogue

en: Query catalog
target: Query catalogue

en: Read and write devices not properly initialized.
target: Read and write devices not properly initialised.

en: Replace:         %s
    Client:          %s
    Storage:         %s
    JobId:           %s
    When:            %s
    Catalog:         %s
    Priority:        %d
    Plugin Options:  %s
target: Replace:         %s
    Client:          %s
    Storage:         %s
    JobId:           %s
    When:            %s
    Catalogue:         %s
    Priority:        %d
    Plug-in Options:  %s

en: Replace:    %s
    Client:     %s
    Storage:    %s
    JobId:      %s
    When:       %s
    Catalog:    %s
    Priority:   %d
target: Replace:    %s
    Client:     %s
    Storage:    %s
    JobId:      %s
    When:       %s
    Catalogue:    %s
    Priority:   %d

en: Requested Volume "%s" on %s is not a Bacula labeled Volume, because: ERR=%s
target: Requested Volume "%s" on %s is not a Bacula labelled Volume, because: ERR=%s

en: Restore Canceled
target: Restore Cancelled

en: Restore Files Dialog
target: Restore Files Dialogue

en: Run Migration job
    JobName:       %s
    Bootstrap:     %s
    Client:        %s
    FileSet:       %s
    Pool:          %s (From %s)
    Read Storage:  %s (From %s)
    Write Storage: %s (From %s)
    JobId:         %s
    When:          %s
    Catalog:       %s
    Priority:      %d
target: Run Migration job
    JobName:       %s
    Bootstrap:     %s
    Client:        %s
    FileSet:       %s
    Pool:          %s (From %s)
    Read Storage:  %s (From %s)
    Write Storage: %s (From %s)
    JobId:         %s
    When:          %s
    Catalogue:       %s
    Priority:      %d

en: Run Restore job
    JobName:         %s
    Bootstrap:       %s
    RegexWhere:      %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalog:         %s
    Priority:        %d
    Plugin Options:  %s
target: Run Restore job
    JobName:         %s
    Bootstrap:       %s
    RegexWhere:      %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalogue:         %s
    Priority:        %d
    Plug-in Options:  %s

en: Run Restore job
    JobName:         %s
    Bootstrap:       %s
    Where:           %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalog:         %s
    Priority:        %d
target: Run Restore job
    JobName:         %s
    Bootstrap:       %s
    Where:           %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalogue:         %s
    Priority:        %d

en: Run Restore job
    JobName:         %s
    Bootstrap:       %s
    Where:           %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalog:         %s
    Priority:        %d
    Plugin Options:  %s
target: Run Restore job
    JobName:         %s
    Bootstrap:       %s
    Where:           %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalogue:         %s
    Priority:        %d
    Plug-in Options:  %s

en: Run Restore job
    JobName:        f%s
    Bootstrap:       %s
    RegexWhere:      %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalog:         %s
    Priority:        %d
target: Run Restore job
    JobName:        f%s
    Bootstrap:       %s
    RegexWhere:      %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalogue:         %s
    Priority:        %d

en: Run Restore job
    JobName:        f%s
    Bootstrap:       %s
    RegexWhere:      %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalog:         %s
    Priority:        %d
    Plugin Options:  %s
target: Run Restore job
    JobName:        f%s
    Bootstrap:       %s
    RegexWhere:      %s
    Replace:         %s
    FileSet:         %s
    Backup Client:   %s
    Restore Client:  %s
    Storage:         %s
    When:            %s
    Catalogue:         %s
    Priority:        %d
    Plug-in Options:  %s

en: SQL query not authorized.
target: SQL query not authorised.

en: Select Catalog resource
target: Select Catalogue resource

en: Sets new client address -- if authorized
target: Sets new client address -- if authorised

en: Show about dialog
target: Show about dialogue

en: TLS connection initialization failed.
target: TLS connection initialisation failed.

en: The catalog contains copies as follows:
target: The catalogue contains copies as follows:

en: The defined Catalog resources are:
target: The defined Catalogue resources are:

en: The following Volumes will be labeled:
    Slot  Volume
    ==============
target: The following Volumes will be labelled:
    Slot  Volume
    ==============

en: The following files are in the Catalog but not on %s:
target: The following files are in the Catalogue but not on %s:

en: This is NOT correct!!!!
target: This is NOT correct!!!

en: Unable to connect to MySQL server.
    Database=%s User=%s
    MySQL connect failed either server not running or your authorization is incorrect.
target: Unable to connect to MySQL server.
    Database=%s User=%s
    MySQL connect failed either server not running or your authorisation is incorrect.

en: Unable to initialize DB lock. ERR=%s
target: Unable to initialise DB lock. ERR=%s

en: Unable to initialize reservation lock. ERR=%s
target: Unable to initialise reservation lock. ERR=%s

en: Unable to initialize resource lock. ERR=%s
target: Unable to initialise resource lock. ERR=%s

en: Unable to initialize the Python lock. ERR=%s
target: Unable to initialise the Python lock. ERR=%s

en: Unable to initialize volume list lock. ERR=%s
target: Unable to initialise volume list lock. ERR=%s

en: Unable to initialize watchdog lock. ERR=%s
target: Unable to initialise watchdog lock. ERR=%s

en: Unable to open Catalog DB control file %s: ERR=%s
target: Unable to open Catalogue DB control file %s: ERR=%s

en: Unauthorized command from this console.
target: Unauthorised command from this console.

en: Use SQL to query catalog
target: Use SQL to query catalogue

en: Use catalog xxx
target: Use catalogue xxx

en: Using Catalog "%s"
target: Using Catalogue "%s"

en: Using Catalog name=%s DB=%s
target: Using Catalogue name=%s DB=%s

en: VSS was not initialized properly. VSS support is disabled. ERR=%s
target: VSS was not initialised properly. VSS support is disabled. ERR=%s

en: Verify Canceled
target: Verify Cancelled

en: Verify Catalog
target: Verify Catalogue

en: Verify Disk to Catalog
target: Verify Disk to Catalogue

en: Verify Init Catalog
target: Verify Init Catalogue

en: Verify Volume to Catalog
target: Verify Volume to Catalogue

en: Volume "%s" has VolStatus %s. It must be Purged or Recycled before relabeling.
target: Volume "%s" has VolStatus %s. It must be Purged or Recycled before relabelling.

en: Volume "%s" not found in catalog. Slot=%d InChanger set to zero.
target: Volume "%s" not found in catalogue. Slot=%d InChanger set to zero.

en: Volume is prelabeled. This tape cannot be scanned.
target: Volume is prelabelled. This tape cannot be scanned.

en: Volume is prelabeled. This volume cannot be copied.
target: Volume is prelabelled. This volume cannot be copied.

en: Volume to Catalog
target: Volume to Catalogue

en: Wrote label to prelabeled Volume "%s" on device %s
target: Wrote label to prelabelled Volume "%s" on device %s

en: You probably don't want to be using this command since it
    creates database records without labeling the Volumes.
    You probably want to use the "label" command.
target: You probably don't want to be using this command since it
    creates database records without labelling the Volumes.
    You probably want to use the "label" command.

en: has been canceled
target: has been cancelled

en: list [pools | jobs | jobtotals | media <pool=pool-name> | 
                   files <jobid=nn> | copies <jobid=nn>]; from catalog
target: list [pools | jobs | jobtotals | media <pool=pool-name> | 
                   files <jobid=nn> | copies <jobid=nn>]; from catalogue

en: list [pools | jobs | jobtotals | media <pool=pool-name> | files <jobid=nn>]; from catalog
target: list [pools | jobs | jobtotals | media <pool=pool-name> | files <jobid=nn>]; from catalogue

en: prune expired records from catalog
target: prune expired records from catalogue

en: prune files|jobs|volume client=<client-name> volume=<volume-name> 
                   prune expired records from catalog
target: prune files|jobs|volume client=<client-name> volume=<volume-name> 
                   prune expired records from catalogue

en: purge records from catalog
target: purge records from catalogue

en: query catalog
target: query catalogue

en: sets new client address -- if authorized
target: sets new client address -- if authorised

en: use <database-name> -- catalog xxx
target: use <database-name> -- catalogue xxx

en: use SQL to query catalog
target: use SQL to query catalogue

en: use catalog xxx
target: use catalogue xxx
